Si_s Supe Posted August 22, 2011 Share Posted August 22, 2011 I bought one of these filters a while back for my old Volvo S70R. I never fitted it and have since sold that car and bought the Supra. The A'pexi filter is still brand new but obviously the fitting hardware doesn't fit. Can you get these separately to allow me to fit it up to the Supra? Quote Link to comment Share on other sites More sharing options...
Konrad Posted August 23, 2011 Share Posted August 23, 2011 Yes, you can get intake system witout cone. Quote Link to comment Share on other sites More sharing options...
Si_s Supe Posted August 23, 2011 Author Share Posted August 23, 2011 Nice one. Any ideas where to get it or what part number to search for? I did have a very brief search before I went to bed last night but to no avail. I'm at work now so if no one knows where to go, I'll have a hunt round tonight. Quote Link to comment Share on other sites More sharing options...
Nic Posted August 23, 2011 Share Posted August 23, 2011 I can't find any reference on the Apexi site for the kit minus the filter. Apexi sell adapters for their cone filters so they can be connected to a generic hose/alu pipe. http://apexi-usa.com/shop/index.php/intake.html?p=2 Quote Link to comment Share on other sites More sharing options...
TubbyTwo Posted August 23, 2011 Share Posted August 23, 2011 you can get generic adapters off ebay for £15 that fit the apexi filter. http://www.ebay.co.uk/itm/New-3-Universal-Adapter-Apexi-Air-Filters-Intake-/180482437236?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2a05977074 used one before and it was fine. Quote Link to comment Share on other sites More sharing options...
Si_s Supe Posted August 23, 2011 Author Share Posted August 23, 2011 Excellent. Is it actually a 3" adapter I need? I guess then I also need a 3" silicone hose and a 3" hose joiner? Does the silicone hose need to be straight or need a bend in it to get under the stock IC pipework?? Quote Link to comment Share on other sites More sharing options...
TubbyTwo Posted August 24, 2011 Share Posted August 24, 2011 that bolts to the bottom of the filter then just inserts into your stock intake hose and holds in with a hose clamp. are the stock intakes on TTs 3inch? Quote Link to comment Share on other sites More sharing options...
Si_s Supe Posted August 24, 2011 Author Share Posted August 24, 2011 I don't think the filter will bolt directly into the intake pipe as the stock IC pipework is in the way. I think I'll need need the following to get the filter under the IC pipework and into the same position as the airbox. 85mm hose joiner - 45degree reducing silicone bend 85mm/75mm - 75mm A'PEXi adapter - filter. Does this sound right or am I overlooking anything? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.