jot_ie Posted July 10, 2006 Author Share Posted July 10, 2006 Indeed I did get it sorted. Some of the newer supras, from 97 on i think, had the yamaha REAS suspension system fitted. Basically its the two front oil-filled shocks linked together with a central oil reservoir supplying the two. Its similar for the rear. Apparently there is an adjuster which controls the flow of oil between the two that sets the stiffness of the suspension. On mine they were set to fully hard. Just had it adjusted to about halfway. Some new bridgestones and a good "manual" 4 wheel alignment using the stock setup did the trick. Its as solid as a rock now. I am really pleased with it. Link to comment Share on other sites More sharing options...
Ian W Posted July 10, 2006 Share Posted July 10, 2006 dammit. i don't have REAS suspension Link to comment Share on other sites More sharing options...
Jspec Germany Posted July 10, 2006 Share Posted July 10, 2006 Me either and I've had two alignments. Maybe time to go to a different place. Link to comment Share on other sites More sharing options...
whitesupratt Posted July 10, 2006 Share Posted July 10, 2006 I had this EXACT same problem, and new rear tyres and 4 wheel COMPUTER geometry sorted it. This was all a few months ago. Although now, my car pulls to the left a bit, but I think Iv hit a few potholes this time! Link to comment Share on other sites More sharing options...
jot_ie Posted July 10, 2006 Author Share Posted July 10, 2006 Just a bit of additional info. Guys who really know about suspension geometry may be able to add a bit more to this My front tyres were wearing very badly on their inside edges, indicating too much camber I personally think a lot of these suspension problems come from bigger than stock tyres and rims, combined with aftermarket shocks and springs which give rise to a huge percentage of these problems. Particularly if these non standard additions are not compensated for in a good alignment carried out by someone who really understands suspension setups. I also think it is crucial to change the tyres befor an alignment as the uneven wear will mean that even when the car is properly aligned it will still feel wrong. What I found with mine was that less camber suited better. I tried the "lance alignment" from mkiv.com and it didnt suit at all. Stock or slightly less suited much better. Also the mechanic I brought it to sets up and races his own cars, he has a real passion for cars. You need someone like that to do it. A lot of the laser alignments are just some guys twiddling bolts until a computer tells them to stop. Fine if you have a stock setup, if you have aftermarket wheels /suspension bits only someone that knows what they are doing can attempt to compensate. thats my two cents worth from my experiences Regards John Link to comment Share on other sites More sharing options...
Homer Posted July 10, 2006 Share Posted July 10, 2006 Fook me, can't believe I recommended Max-GT to someone. How things change... Hijack over Link to comment Share on other sites More sharing options...
Chiefgroover Posted July 10, 2006 Share Posted July 10, 2006 Just a bit of additional info. Guys who really know about suspension geometry may be able to add a bit more to this My front tyres were wearing very badly on their inside edges, indicating too much camber I personally think a lot of these suspension problems come from bigger than stock tyres and rims, combined with aftermarket shocks and springs which give rise to a huge percentage of these problems. Particularly if these non standard additions are not compensated for in a good alignment carried out by someone who really understands suspension setups. I also think it is crucial to change the tyres befor an alignment as the uneven wear will mean that even when the car is properly aligned it will still feel wrong. What I found with mine was that less camber suited better. I tried the "lance alignment" from mkiv.com and it didnt suit at all. Stock or slightly less suited much better. Also the mechanic I brought it to sets up and races his own cars, he has a real passion for cars. You need someone like that to do it. A lot of the laser alignments are just some guys twiddling bolts until a computer tells them to stop. Fine if you have a stock setup, if you have aftermarket wheels /suspension bits only someone that knows what they are doing can attempt to compensate. thats my two cents worth from my experiences Regards John I agree completely. I had a similar experience. Personally I;d rather have a well setup geometry rather than all the expensive add on's money could buy and bad geometry. Lance alignment sucks. Link to comment Share on other sites More sharing options...
Homer Posted July 11, 2006 Share Posted July 11, 2006 Lance alignment sucks. Is that for REAS or in general, if general, please elaborate Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now