bigbloodyturbo Posted August 17, 2011 Share Posted August 17, 2011 Has anyone got some info or some links to places that tinker with chrysler v6's? Friend of mine is considering swapping his rover v8 for something else in his TR7 and I remember someone on here commenting on the potential of these v6's and their relative light weight. Any info to pass on to him would be handy. Quote Link to comment Share on other sites More sharing options...
Miguel Posted August 17, 2011 Share Posted August 17, 2011 I vaguely remember CW commenting on the Chrysler V6's, might be worth aiming some questions his way? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 17, 2011 Share Posted August 17, 2011 I have a bare 3.5 V6 dry sumped engine in the workshop, brand new. They are a good low tech engine that are used in various motorsport categories from single seaters to sports prototypes. Here's one in a friend's Jade, with twin turbos (no intercoolers, just low pressure charging). About 500 BHP. AER did a lot of development on these engines and do throttle bodies, pistons, cams, air boxes, blah blah. Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted August 17, 2011 Author Share Posted August 17, 2011 I have a bare 3.5 V6 dry sumped engine in the workshop, brand new. They are a good low tech engine that are used in various motorsport categories from single seaters to sports prototypes. Here's one in a friend's Jade, with twin turbos (no intercoolers, just low pressure charging). About 500 BHP. AER did a lot of development on these engines and do throttle bodies, pistons, cams, air boxes, blah blah. Exactly what I was looking for. He currently has a TR7/8 with a 3.5 rover with twin SU's. It makes a very satisfying noise but it doesn't really have the most power in the world. He had been looking at 1uz's as a few TR8 owners across the pond had done this but when I mentioned these V6's he asked for a bit more info. I'll pass this on to him and see how he gets on. Approximately how much would it cost and how much effort would it take to get 320-350hp out of a 3.5? is it cost effective in the greater scheme off things? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.