Polo Posted August 7, 2011 Share Posted August 7, 2011 Aftert he following bits, no masive rush, its for my competition drift car so its for the winter build. Need the following: V160 gearbox Slave cylinder, propshaft and gear stick to suit Long shot but centre hub to suit v160 and OSgiken tripple plate clutch Cams: ideally 264 in and ex with highest lift poss, but open to what you have, In and Ex cam pulleys, Uprated valve springs and retainers. Willing to PX stock twin turbos and/or R154 gearboxs. Link to comment Share on other sites More sharing options...
Ian C Posted August 8, 2011 Share Posted August 8, 2011 I have a HKS 272 intake cam with Link to comment Share on other sites More sharing options...
Noz Posted August 8, 2011 Share Posted August 8, 2011 Why didnt you like them out of interest? Link to comment Share on other sites More sharing options...
Robbie Posted August 10, 2011 Share Posted August 10, 2011 I'm Selling my jun cams and I have valve springs and retainers. I also have a flywheel with a clutch attached and possibly a slave cylinder Link to comment Share on other sites More sharing options...
neilthenut Posted August 14, 2011 Share Posted August 14, 2011 why the cange from a r154 to a 6spd polo? due to te problems you've had with the clutch? Link to comment Share on other sites More sharing options...
Polo Posted October 19, 2011 Author Share Posted October 19, 2011 why the cange from a r154 to a 6spd polo? due to te problems you've had with the clutch? Iv blown 4 r154s to bits this year!!! And keep shattering the thrust washers!! IM getting sick or changing the damn things lol. Also the 6spd ratios will be much better suited to my diff ratio. Bumping this again guys as the winter is here and i want to crack on with the winter build. Link to comment Share on other sites More sharing options...
dr_jekyll Posted October 21, 2011 Share Posted October 21, 2011 kenblockseal is selling a v160 Link to comment Share on other sites More sharing options...
mark newman Posted October 21, 2011 Share Posted October 21, 2011 I have a set of 264 cams about 1000 miles on them Link to comment Share on other sites More sharing options...
Jamesy Posted October 21, 2011 Share Posted October 21, 2011 pm'd Link to comment Share on other sites More sharing options...
Recommended Posts