Guest MR2dan Posted July 30, 2011 Share Posted July 30, 2011 (edited) Hi all, wonder if anyone can help me please? i bought a complete active spoiler assembly from Neil-N/A on here (which is all fitted now and lovely) included in the bundle was one of StraightSix's manual controllers. Just have a question about it as i'm sure i'm doing something wrong. I fitted it today as per the original instruction sheet supplied, however the spoiler doesnt actuate :/ now myself and dad did a few continuity tests with the multimeter and found out that at the headlight end, the black and blue wires are both sending a positive signal down the loom. whereas the OEM setup only sends a live signal breifly to move the spoiler. we have double checked that the switch end is fine wiring wise but still no joy. Does anyone have any ideas on what i might be doing wrong? Cheers, Dan Edited August 2, 2011 by MR2dan not a garfy as first thought (see edit history) Quote Link to comment Share on other sites More sharing options...
Guest MR2dan Posted July 31, 2011 Share Posted July 31, 2011 bump Quote Link to comment Share on other sites More sharing options...
Guest MR2dan Posted August 2, 2011 Share Posted August 2, 2011 Sorry, corrected. It's a Straightsix controller same problem applies though. Bump Quote Link to comment Share on other sites More sharing options...
straightsix Posted August 2, 2011 Share Posted August 2, 2011 How about asking me??? PM me dude. Quote Link to comment Share on other sites More sharing options...
Neil-NA Posted August 2, 2011 Share Posted August 2, 2011 Sorry to bth of you i completly forgot to send the pm to straightsix, my apologies to the both of you. Let me know what the score is if i need to do anything. Quote Link to comment Share on other sites More sharing options...
straightsix Posted August 2, 2011 Share Posted August 2, 2011 Sorry to bth of you i completly forgot to send the pm to straightsix, my apologies to the both of you. Let me know what the score is if i need to do anything. No prob Neil - just would be useful for Dan (I'm guessing that's his name!) to contact me directly Quote Link to comment Share on other sites More sharing options...
Neil-NA Posted August 2, 2011 Share Posted August 2, 2011 No prob Neil - just would be useful for Dan (I'm guessing that's his name!) to contact me directly It was my fault mate i said i would PM you but forgot. Quote Link to comment Share on other sites More sharing options...
Guest MR2dan Posted August 4, 2011 Share Posted August 4, 2011 How about asking me??? PM me dude. Sorry for the delay, only just recieved the alerts via Hotmail! As above in this post really mate, can't think of where we're going wrong :/ followed the instructions to the T. Quote Link to comment Share on other sites More sharing options...
Guest MR2dan Posted August 7, 2011 Share Posted August 7, 2011 Bump again Quote Link to comment Share on other sites More sharing options...
straightsix Posted August 13, 2011 Share Posted August 13, 2011 Bump again Can you just send me a PM with the details please? I don't spend all day checking for new posts. I take it you do want it sorted?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.