Geo Posted July 29, 2011 Share Posted July 29, 2011 So i went about tracing the problem, last night but ran out of light to work, started this morning again Two things jumped at me as the Culprits Guessing new Mani, and Cat to be ordered. Going to replace the O2 sensor while im in there. Link to comment Share on other sites More sharing options...
AlexM Posted July 29, 2011 Share Posted July 29, 2011 I thought after seeing the first post you were going to say 'The manifold is missing! ', still, bad enough. Link to comment Share on other sites More sharing options...
TubbyTwo Posted July 29, 2011 Share Posted July 29, 2011 [attach=config]136552[/attach] Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted July 29, 2011 Share Posted July 29, 2011 Does she want any bling under there? Link to comment Share on other sites More sharing options...
David P Posted July 29, 2011 Share Posted July 29, 2011 It looks like you found the makings of several funny noises there. Link to comment Share on other sites More sharing options...
j_jza80 Posted July 29, 2011 Share Posted July 29, 2011 What car is it? Can't tell by the pics, but appears to be rwd, Toyota? And circa 20 years old. Link to comment Share on other sites More sharing options...
MaveriK Posted July 29, 2011 Share Posted July 29, 2011 What cad is it? [ATTACH=CONFIG]136556[/ATTACH] Link to comment Share on other sites More sharing options...
David P Posted July 29, 2011 Share Posted July 29, 2011 A niosey one. Link to comment Share on other sites More sharing options...
staples230uk Posted July 29, 2011 Share Posted July 29, 2011 [attach=config]136552[/attach] "Shut up!" lol That looks as though it would make some clatter. Link to comment Share on other sites More sharing options...
The Raven Posted July 29, 2011 Share Posted July 29, 2011 I thought after seeing the first post you were going to say 'The manifold is missing! ', still, bad enough. Me to ! Link to comment Share on other sites More sharing options...
Geo Posted July 29, 2011 Author Share Posted July 29, 2011 94' Suzuki Vitara 1.6 JLX, My problem is getting parts for it, as it stands iv dropped the manifold off to try and get welded, but as its cast iron im not so sure its going to work, so im trying to track down a 2nd hand manifold. no luck as of yet Link to comment Share on other sites More sharing options...
ronttuk Posted July 29, 2011 Share Posted July 29, 2011 That must be the worst weld ive ever seen was it done by a chicken farmer ??? Link to comment Share on other sites More sharing options...
barneybrendan Posted July 29, 2011 Share Posted July 29, 2011 That must be the worst weld ive ever seen was it done by a chicken farmer ??? Link to comment Share on other sites More sharing options...
pedrosixfour Posted July 29, 2011 Share Posted July 29, 2011 If I were you I'd put those parts back where you found them and spend the money on a bigger stereo. Link to comment Share on other sites More sharing options...
Tyson Posted July 29, 2011 Share Posted July 29, 2011 Can't you get someone to make you one up? Link to comment Share on other sites More sharing options...
David P Posted July 29, 2011 Share Posted July 29, 2011 Plenty of them being cannibalised here. http://shop.ebay.co.uk/i.html?_nkw=Breaking+Suzuki+Vitara+1.6&_sacat=0&_sop=19&_dmpt=UK_CarsParts_Vehicles_CarParts_SM&_odkw=Suzuki+Vitara+1.6+exhaust&_osacat=0&_trksid=p3286.c0.m270.l1313 Link to comment Share on other sites More sharing options...
Geo Posted July 29, 2011 Author Share Posted July 29, 2011 Can't you get someone to make you one up? highly doubt it bud, prob cost me more to make up than buy new. Looks like iv tracked down a 2nd hand one at a breakers, just waiting on them contacting me Link to comment Share on other sites More sharing options...
Kirk Posted July 29, 2011 Share Posted July 29, 2011 Finally putting those muscles to good use! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now