Ryan.G Posted November 13, 2011 Author Share Posted November 13, 2011 Hmmm, I like this quite a bit. But I bought a dash2. I'm in a quandary!! Does this come with some kind of mounting kit? Will come with a Window mount kit but can be modified to fit on dash Quote Link to comment Share on other sites More sharing options...
jagman Posted November 13, 2011 Share Posted November 13, 2011 I hope Tim can add the extra input I PMed him - then it would become must have in my view - nice unit regardless Quote Link to comment Share on other sites More sharing options...
J_Supra_07 Posted November 13, 2011 Share Posted November 13, 2011 No sensors needed just wires into the ecu with 4 wires. All data is sent via CAN bus to the display Cool will have to sort out remote link anless ur near by when you get them. Afr Reading how dose it read that or dose it not display that? Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted November 13, 2011 Share Posted November 13, 2011 Great stuff! i recently imported something similar that interface's with my Skylines ECU and displays whatever i want,data-logss, alsodoubless as sat nav andmediaa player:) Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 25, 2011 Share Posted November 25, 2011 Can this be altered to read any of the Motec CAN protocols, or the Motec made to output a custom CAN that the Toucan can read? Thanks. Quote Link to comment Share on other sites More sharing options...
Ryan.G Posted November 25, 2011 Author Share Posted November 25, 2011 Can this be altered to read any of the Motec CAN protocols, or the Motec made to output a custom CAN that the Toucan can read? Thanks. Give Tim a shout Chris, im sure it can TimH [[email protected]] Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 25, 2011 Share Posted November 25, 2011 I have PM'd him on the Syvecs forum, thanks Ryan. Quote Link to comment Share on other sites More sharing options...
TimH_ Posted December 1, 2011 Share Posted December 1, 2011 (edited) Don't know why I didn't get a notification of your post Chris (must check spam) but, as you obviously know, we have discussed this now. I now have information from MoTec and am quite confident that it can be made to work with no problem, but please bear with me as I can't get on to it straight away. FYI the production unit is "dual standard" operating using either RS232 or CAN bus - CAN provides more functionality but does require changes to the Syvecs calibration to make it all work, whereas RS232 works out of the box. Many thanks for all the support and kind words during the development of this product, and if you have any questions please do not hesitate to ask Cheers!! Edited March 19, 2012 by TimH_ Removed unauthorised selling (see edit history) Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 1, 2011 Share Posted December 1, 2011 Good news, thanks Tim. Should be a popular product! Quote Link to comment Share on other sites More sharing options...
TimH_ Posted December 4, 2011 Share Posted December 4, 2011 If anyone's interested, I just added a downloads page to the website (http://www.jti.uk.com) with a draft installation/user guide, a datasheet/brochure and a Calibration file for the CAN bus setup Quote Link to comment Share on other sites More sharing options...
AlexM Posted December 5, 2011 Share Posted December 5, 2011 Hey Tim, I went to pre-order today, but it's now showing as 'not yet available', has the product been delayed? Quote Link to comment Share on other sites More sharing options...
AlexM Posted December 5, 2011 Share Posted December 5, 2011 Looks like it's available again now. Quote Link to comment Share on other sites More sharing options...
TimH_ Posted December 6, 2011 Share Posted December 6, 2011 Thanks for the order Alex - not sure why it showed as unavailable though!! Quote Link to comment Share on other sites More sharing options...
TimH_ Posted December 10, 2011 Share Posted December 10, 2011 (edited) Edited March 19, 2012 by TimH_ (see edit history) Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted January 17, 2012 Share Posted January 17, 2012 Any pics of these fitted in a supra? where a decent mounting point is Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted March 19, 2012 Share Posted March 19, 2012 (edited) Has anyone installed and used one of these yet? That is outside of testing and development? From what I have read this will read pretty much input and display any sensor going to the Syvecs. It will also remove the need to have map toggle/switches/buttons? Can it also be used to select different traction modes for a Syvecs with traction control setup? Or would I still need a switch for this? If this thing does what it says I will sell my dash2 and go for one of these instead. Edited March 19, 2012 by mwilkinson (see edit history) Quote Link to comment Share on other sites More sharing options...
dude Posted March 19, 2012 Share Posted March 19, 2012 Has anyone installed and used one of these yet? That is outside of testing and development? From what I have read this will read pretty much input and display any sensor going to the Syvecs. It will also remove the need to have map toggle/switches/buttons? Can it also be used to select different traction modes for a Syvecs with traction control setup? Or would I still need a switch for this? If this thing does what it says I will sell my dash2 and go for one of these instead. If its what was in a skyliner at Marham Matt then its all up and working, looked ace and yes Im sure Ryan was saying that it can be used to select diff maps and TC etc. Quote Link to comment Share on other sites More sharing options...
SteveR Posted March 19, 2012 Share Posted March 19, 2012 Been waiting for this development to come along forever, I hate having dials taking up air vents and added-on here and there. However I'm not sure if it's hit full production yet or not - Ryan, you about mate? Quote Link to comment Share on other sites More sharing options...
Littler Posted March 19, 2012 Share Posted March 19, 2012 Ryan has it up and running on the GTR and there is a member on here who has recently added it to their Supe: Quote Link to comment Share on other sites More sharing options...
SteveR Posted March 19, 2012 Share Posted March 19, 2012 Ryan has it up and running on the GTR and there is a member on here who has recently added it to their Supe: Yup, I've seen that video, read this whole thread - I'm still not sure if they are in manufacture or not yet (i.e. full production units being produced in higher quantities than the odd one here and there). I know Ryan well, he mapped my Supra, the first VVTi to get the Solaris/Syvecs. Quote Link to comment Share on other sites More sharing options...
Littler Posted March 19, 2012 Share Posted March 19, 2012 Yup, I've seen that video, read this whole thread - I'm still not sure if they are in manufacture or not yet (i.e. full production units being produced in higher quantities than the odd one here and there). I know Ryan well, he mapped my Supra, the first VVTi to get the Solaris/Syvecs. Ah I see what your after now lol, not sure my post was any help Quote Link to comment Share on other sites More sharing options...
mwilkinson Posted March 19, 2012 Share Posted March 19, 2012 If its what was in a skyliner at Marham Matt then its all up and working, looked ace and yes Im sure Ryan was saying that it can be used to select diff maps and TC etc. Good to hear John, sounds like a very good bit of kit. Will give Tim a shout via his website and see what the score is with production and availability. Quote Link to comment Share on other sites More sharing options...
TimH_ Posted March 19, 2012 Share Posted March 19, 2012 (edited) Hi Guys, VERY sorry not to have replied - despite checking all the settings I have not been getting notifications of people posting on this thread I like to reply promptly to any query, so I'm very embarrassed not to have checked back here more often Anyway, I can confirm that this unit is in full production and has been shipping since December last year. I do believe there are some examples fitted to Supras, but I don't know who they may be: I know of Toucan's fitted to Impreza and Skylines, and of two fitted to Lotus', plus one in Ryan's GT-R as has been said. Having checked settings AGAIN, I hope that I will see any replies to this, but I will check back in again soon in case I still don't get email notification. Edited March 19, 2012 by TimH_ Got slapped wrists for selling on the forum - apologies as it was not my intention. (see edit history) Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 19, 2012 Share Posted March 19, 2012 I have one of these, Lee has got a nice place to mount it on mine. Lovely bit of kit Quote Link to comment Share on other sites More sharing options...
TimH_ Posted March 19, 2012 Share Posted March 19, 2012 I got an email notification of a reply! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.