fruity_south Posted July 24, 2011 Share Posted July 24, 2011 i did a search and came up with this thread. http://www.mkivsupra.net/vbb/showthread.php?11992-quick-flashing-indicators-... iv done pretty much the same thing as them but in the front fog light holders instead of the side lights like them. Now i can understand how the smaller bulms would cause this to happen but am a little confused on how to stop it. this whole resister thing is a bit confusing to me. can some one help please. Link to comment Share on other sites More sharing options...
mellonman Posted July 25, 2011 Share Posted July 25, 2011 The bulb flashes quicker because there is less resistance on the circuit. so it can complete the cycle quicker. try a small resistor Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 cheers but i dont know where it would go and if it would require one each side or just on one. Link to comment Share on other sites More sharing options...
merckx Posted July 25, 2011 Share Posted July 25, 2011 There are 2 wires that go to each bulb, fit a resistor inline on either wire, do this on both sides of the car. What's the wattage of the old bulb and it's replacement? Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 so 4 resisters? im not sure ill check when i get in this evening and post it up. Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 i have been told by someone at work that my 501 bulbs could well be 5watt and that to stop it flasshing so fast i need to use a 21 watt bulb. im aware that there are the 380 bulbs but not sure if these would fit in the 501 holder. Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 just found out the 380 wont fit the holder. Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 think ill give these a go http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=310224122302&category=28646&_trksid=p5197.c0.m619 Link to comment Share on other sites More sharing options...
Wez Posted July 25, 2011 Share Posted July 25, 2011 You can just get the correct rating bulbs to solve the issue, I had to when I moved mine into the main front lights Link to comment Share on other sites More sharing options...
mellonman Posted July 25, 2011 Share Posted July 25, 2011 it would be one resistor per lamp it doesnt matter what side of the lamp it goes on it is just compensating for the watt differance Link to comment Share on other sites More sharing options...
fruity_south Posted July 25, 2011 Author Share Posted July 25, 2011 Wez could you forward me a link to the bulbs please mate as i have searched high and low for them and cant find them . Link to comment Share on other sites More sharing options...
merckx Posted July 25, 2011 Share Posted July 25, 2011 so 4 resisters? One resistor wired into each indicator bulb, I meant it didn't matter which of the 2 wires for each bulb it was wired into. Obviously easier to get the correct wattage bulbs if you can. Link to comment Share on other sites More sharing options...
Wez Posted July 25, 2011 Share Posted July 25, 2011 Wez could you forward me a link to the bulbs please mate as i have searched high and low for them and cant find them . Got them from eBay, there is some info in here when I did the mod back in April 2006 http://www.mkivsupra.net/vbb/showthread.php?65337-Front-indicator-mod&highlight=indicator Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now