Blackie Posted July 20, 2011 Share Posted July 20, 2011 Getting my geo set up done at last since i bought a pair of rears as the car seems to eat them (Cambers well out and scrubbing the inside) Will i notice a massive difference in handling or will it be a bit of a "Oh its slightly better"? Never had it done before so just wondering Link to comment Share on other sites More sharing options...
sammytruck Posted July 20, 2011 Share Posted July 20, 2011 Had mine done two weeks ago and it was completely different.......much much better, felt like it sat down on the road and didnt change direction on its own...lol Link to comment Share on other sites More sharing options...
Blackie Posted July 20, 2011 Author Share Posted July 20, 2011 How much was it? Mines getting done for £45 but i dont know what they cost normally? Link to comment Share on other sites More sharing options...
Bailey. Posted July 20, 2011 Share Posted July 20, 2011 Who is doing it? Link to comment Share on other sites More sharing options...
sammytruck Posted July 20, 2011 Share Posted July 20, 2011 How much was it? Mines getting done for £45 but i dont know what they cost normally?...With vat £143..had a seized part and they used some oxy/acet to free it up apparently.....looked at your car.....really nice looking car...I like it. Link to comment Share on other sites More sharing options...
Blackie Posted July 20, 2011 Author Share Posted July 20, 2011 Who is doing it? Gs auto. i know Vickery that works there so think i got a bit of a discount ...With vat £143..had a seized part and they used some oxy/acet to free it up apparently.....looked at your car.....really nice looking car...I like it. Hopefully mine goes smoothly. Cheers for the car comment Link to comment Share on other sites More sharing options...
sideexitsupra Posted July 20, 2011 Share Posted July 20, 2011 Mine was about £120 from WIM. £45 sounds cheap? Link to comment Share on other sites More sharing options...
AlliRR Posted July 20, 2011 Share Posted July 20, 2011 I had mine done when I bought my car, chewed two sets of tyres inside 6k, got it re-done by a known specialist in my area a few months ago, completely different car - grips and goes like never before... makes me wonder WTF the last guys were doing when they apparently set it up for "fast road".... I paid £120 and I couldnt be happier with the result. Link to comment Share on other sites More sharing options...
Blackie Posted July 20, 2011 Author Share Posted July 20, 2011 Mine was about £120 from WIM. £45 sounds cheap? I think its because i know a bloke there but knowing my luck they will bump it up because of "Problems" We will see Link to comment Share on other sites More sharing options...
DodgyRog Posted July 21, 2011 Share Posted July 21, 2011 I paid about £80 for mine and made a big difference to the handling, sits better and doesn't squirm around as much when pulling hard Link to comment Share on other sites More sharing options...
Lude Posted July 21, 2011 Share Posted July 21, 2011 massive difference! when i had my car, was running stupid camber, looked like a VW euro boy lol was wearing tyers stupidly, and at high speed was wandering/crabbing slightly. after a goe, all of the above gone, and handles much more sharp & straight, and no silly tyre wear. i paid £140. print here Link to comment Share on other sites More sharing options...
Si_s Supe Posted July 21, 2011 Share Posted July 21, 2011 Going to get mine done when it's lowered! Needs it now let alone once it's been dropped!! I'm trying to decide between getting it done at a local specialist called Denmead Tyre Services who use the Hunter machine or go full and take it to Sam at TDI!? Link to comment Share on other sites More sharing options...
Ian W Posted July 21, 2011 Share Posted July 21, 2011 AlliRR, who did yours? (First and second time round) Link to comment Share on other sites More sharing options...
Blackie Posted July 21, 2011 Author Share Posted July 21, 2011 and at high speed was wandering/crabbing slightly. Mine gets a bit "Light" at 130-140mph on the track, I blamed the body kit lol Link to comment Share on other sites More sharing options...
Havard Posted July 21, 2011 Share Posted July 21, 2011 I was telling Ian Ian the other day that our local guy does it for £45. He has all the machines and a digital readout on all the adjustments. I have never understood why some places charge three figures for whatg they do? There must be more to this.? H. Link to comment Share on other sites More sharing options...
Blackie Posted July 21, 2011 Author Share Posted July 21, 2011 I was telling Ian Ian the other day that our local guy does it for £45. He has all the machines and a digital readout on all the adjustments. I have never understood why some places charge three figures for whatg they do? There must be more to this.? H. I think they charge loads as not many garages do it and the kit is well expensive Link to comment Share on other sites More sharing options...
Havard Posted July 21, 2011 Share Posted July 21, 2011 I think they charge loads as not many garages do it and the kit is well expensive I would just like to see if there is any difference in what they do? My local tyre place puts like a camera on each wheel and then the readings are shown on monitors around the car. He then goes around adjusting the camber, toe etc. I had my NA done a couple of years ago and it handled like a dream afterwards. H. Link to comment Share on other sites More sharing options...
Blackie Posted July 21, 2011 Author Share Posted July 21, 2011 I will let you know, I think this lot use lasers or something Link to comment Share on other sites More sharing options...
AlliRR Posted July 21, 2011 Share Posted July 21, 2011 I dont want to say who did a crap job here mate, il pm you that. I would highly recommend kenneth brown motor engineers in hillington. Link to comment Share on other sites More sharing options...
Lude Posted July 23, 2011 Share Posted July 23, 2011 the machine costs 30k, thats why it costs a lot i think. it doesnt take that long for them to do. they just atach those camera things on each wheel, then thats lasered to a computer in the front/centre. then the mechanic just undoes the camber arms etc, and adusts the wheels until the computer reads the correct measurement/degree etc. Link to comment Share on other sites More sharing options...
ScottC Posted July 23, 2011 Share Posted July 23, 2011 I had mine done at WIM last year and it absolutely transformed the car. I could feel the difference just driving out of the industrial estate. Link to comment Share on other sites More sharing options...
Blackie Posted July 23, 2011 Author Share Posted July 23, 2011 http://i181.photobucket.com/albums/x169/lude200/projects/Picture002-1.jpg the machine costs 30k, thats why it costs a lot i think. it doesnt take that long for them to do. they just atach those camera things on each wheel, then thats lasered to a computer in the front/centre. then the mechanic just undoes the camber arms etc, and adusts the wheels until the computer reads the correct measurement/degree etc. Awesome. Im hoping all my nuts or bolts arnt seized up, They should be able to cope though i hope? I had mine done at WIM last year and it absolutely transformed the car. I could feel the difference just driving out of the industrial estate. cant wait to get mine done now, As i said before it gets light atabout 130-140 im guessing its something to do with all the geo Link to comment Share on other sites More sharing options...
JODY T Posted July 24, 2011 Share Posted July 24, 2011 Still don't know how ur getting 140 out of it without a delimiter fitted, couldn't see any trace of one anywhere on the loom!! Link to comment Share on other sites More sharing options...
Havard Posted July 24, 2011 Share Posted July 24, 2011 http://i181.photobucket.com/albums/x169/lude200/projects/Picture002-1.jpg the machine costs 30k, thats why it costs a lot i think. it doesnt take that long for them to do. they just atach those camera things on each wheel, then thats lasered to a computer in the front/centre. then the mechanic just undoes the camber arms etc, and adusts the wheels until the computer reads the correct measurement/degree etc. That looks similar to the set up in Wigan at £45 a chuck..!! H. Link to comment Share on other sites More sharing options...
Iky Posted July 24, 2011 Share Posted July 24, 2011 I paid £49 inc vat to have mine done at Just Car Clinic in Leeds. They used a hunter hawk eye machine. I believe the difference in cost is due to the fact that 'generally' (unless your being ripped off of course) the guys that charge 3x more eg, C.W & WIM are far more knowledgeble and can tailor the settings depending on what handling characteristics your after. The machine is incredibly easy to use but the skill is in knowing what degree/mm setting does what. Thats what you are paying extra for as it takes more time. £49 is a good price if your just after stock settings running stock wheels. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now