Guest George89 Posted January 25, 2012 Share Posted January 25, 2012 Front brake cooling ducting Quote Link to comment Share on other sites More sharing options...
hodge Posted January 25, 2012 Share Posted January 25, 2012 Extended sump kit please. http://i30.photobucket.com/albums/c338/jamie450x/extendedsump3.jpg http://i30.photobucket.com/albums/c338/jamie450x/extendedsump2.jpg http://i30.photobucket.com/albums/c338/jamie450x/extendedsump.jpg What would be the advantages of having an extended sump Jamie, apart from holding more oil. Quote Link to comment Share on other sites More sharing options...
Brazil Posted January 25, 2012 Share Posted January 25, 2012 Complete new dashboard re-design 'in carbon fiber' with holes for optional guages and a modern neddle instumental clocks...! Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted January 25, 2012 Share Posted January 25, 2012 BIG brake kit Quote Link to comment Share on other sites More sharing options...
mellonman Posted January 25, 2012 Share Posted January 25, 2012 What would be the advantages of having an extended sump Jamie, apart from holding more oil. very good question only thing i can think of is more oil so will stay cooler longer Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 25, 2012 Share Posted January 25, 2012 Yup more oil, do away with the oil cooler and keep oil pressure high. Quote Link to comment Share on other sites More sharing options...
hodge Posted January 25, 2012 Share Posted January 25, 2012 Yup more oil, do away with the oil cooler and keep oil pressure high. So how will a bigger sump do away with the oil cooler and increase pressure. Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 25, 2012 Share Posted January 25, 2012 Oil coolers lower oil pressure. Quote Link to comment Share on other sites More sharing options...
hodge Posted January 25, 2012 Share Posted January 25, 2012 Oil coolers lower oil pressure. I'll start a thread in technical about it as I don't want to clutter SRD's thread up. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted January 26, 2012 Share Posted January 26, 2012 SRD build plates please! these would be awesome. Plus they would add £££££££££££££££££££££ when we sell up. Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted January 27, 2012 Share Posted January 27, 2012 lots of engine bling like rad shroud covers etc these will sell like hot cakes Quote Link to comment Share on other sites More sharing options...
Lee P Posted January 28, 2012 Share Posted January 28, 2012 I am now doing a radiator plate, will put a thread up today. It goes between the rad and the front panel, looks good and helps keep the air going through rad. Am doing polished and standard versions. In stock now. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted January 28, 2012 Share Posted January 28, 2012 Nice addition Lee, i did my own once upon a time but not doing stainless no more due to bulk price Quote Link to comment Share on other sites More sharing options...
ripped_fear Posted January 28, 2012 Share Posted January 28, 2012 Shame you didnt bring these out earlier i was looking for one a couple of weeks ago but ordered a custom one now. Good addition im sure they will sell very easyly Quote Link to comment Share on other sites More sharing options...
Jellybean Posted May 16, 2012 Share Posted May 16, 2012 What about a kit similar to Hose Techniques Kit http://www.hosetechniques.com/index.php?main_page=product_info&products_id=1993 This kit contains all the Silicone Vacuum hose needed for your application in the correct lengths required for a total of: (32 ft Total) Also included will be all the extras such as tie wraps, tools, fittings (when applicable) and instructions for FREE! Each hose in your kit is of the correct proportion, both in length and wall thickness (you can rely on HoseTechniques to have determined the appropriate wall thicknesses for each hose provided in your kit). The color and gloss of our hose will provide a brilliant look to your car engine, and our guarantee provides the confidence that you are installing the highest quality silicone available, designed to eliminate the problems caused by deteriorating* OEM rubber hoses. (*You probably already know about the fact that poor quality hoses can severally affect the performance of your car.) Suggested Uses - Suggested Hose I.D. Sizes* Intake Manifold (small fittings) - 03.5mm Boost Controllers (Greddy, HKS & other) - 03.5mm, 04.mm or 06.0mm Windshield Washer Bottle - 04.0mm Intake Manifold (small fittings) - 06.0mm Radiator Overflow Hose - 06.0mm or 08.0mm Hood Hold Up Rod - 06.0mm or 08.0mm Intake Pipe (large fittings) - 08.0mm (includes aftermarket intakes & some radiator overflow) Misc. covers of hard lines, etc. - 10.0mm (refer to Slit ‘n Groom Technique in instructions) Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted June 9, 2012 Share Posted June 9, 2012 do you do polished rad brackets ? Quote Link to comment Share on other sites More sharing options...
Jellybean Posted July 31, 2012 Share Posted July 31, 2012 Would love the engine bay cover covering the rear Firewall , master cylinders and ugly EVAP system hoses ! So much cheaper and more sensible than doing a wire tuck plus I think it looks better Quote Link to comment Share on other sites More sharing options...
TheTurtleshead Posted July 31, 2012 Share Posted July 31, 2012 Funny you should say that... I designed one yesterday for the ABS side. Keep an eye out, it will hopefully be along soon, along with a brake master one as well. Quote Link to comment Share on other sites More sharing options...
monsween Posted July 31, 2012 Share Posted July 31, 2012 Harness bars Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted July 31, 2012 Share Posted July 31, 2012 custom rear diffuser? out of sheet metal! like ryan G race car Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted July 31, 2012 Share Posted July 31, 2012 Funny you should say that... I designed one yesterday for the ABS side. Keep an eye out, it will hopefully be along soon, along with a brake master one as well. I would be interested in this Quote Link to comment Share on other sites More sharing options...
Boge Posted July 31, 2012 Share Posted July 31, 2012 Carbon fibre fan surround? Quote Link to comment Share on other sites More sharing options...
Slam Posted July 31, 2012 Share Posted July 31, 2012 Carbon fibre fan surround? Carbon dip it Quote Link to comment Share on other sites More sharing options...
Lee P Posted July 31, 2012 Share Posted July 31, 2012 custom rear diffuser? out of sheet metal! like ryan G race car Already on that, wont be long Quote Link to comment Share on other sites More sharing options...
dandan Posted August 1, 2012 Share Posted August 1, 2012 I'd probably take an extended sump depending on price. Can you cange the sump with the engine in the car or does it need to come out? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.