Jamesy Posted July 14, 2011 Share Posted July 14, 2011 Hi guys n girls We will shortly be introducing some new and exciting SRD products to the market which i believe will be very popular. In the meantime we'd be very interested to know if you have any ideas or suggestions as to the kind of SRD products you would like to see and be able to purchase. They can range from big expensive full engine kit ranges to smaller merchandise things and anything inbetween....! Quote Link to comment Share on other sites More sharing options...
johnny g Posted July 14, 2011 Share Posted July 14, 2011 From a selfish point of view, I'd like to see: - VVTi Hard rad pipe - VVTi Intake Cam Quote Link to comment Share on other sites More sharing options...
Luxluc Posted July 14, 2011 Share Posted July 14, 2011 Racing street port and polished head. Quote Link to comment Share on other sites More sharing options...
sdistc Posted July 14, 2011 Share Posted July 14, 2011 From a selfish point of view, I'd like to see: - VVTi Hard rad pipe - VVTi Intake Cam This. Also would like to see a smoothed/polished upper water neck, and lower water neck to allow shorter radiator hose (like the TwinsTurbo kit, but one piece). Quote Link to comment Share on other sites More sharing options...
Geo Posted July 14, 2011 Share Posted July 14, 2011 SRD Scotland. In turn being 5 mins from me. On products, god where do we start? A nice all in one fuel package would be nice, braided lines though out, rail, injectors, fuel pump(s) I sure i can come up with more. Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted July 14, 2011 Share Posted July 14, 2011 Although fully aware that I don't even own a Supra anymore, an off-the-shelf V8 conversion kit would do well IMO. Quote Link to comment Share on other sites More sharing options...
johnny g Posted July 14, 2011 Share Posted July 14, 2011 Although fully aware that I don't even own a Supra anymore, an off-the-shelf V8 conversion kit would do well IMO.Good call, the 1uz and possibly other make v8, like the LS series? Quote Link to comment Share on other sites More sharing options...
Josh Posted July 14, 2011 Share Posted July 14, 2011 Possibly an SRD SMIC dependant upon how much you could sell them for. Quote Link to comment Share on other sites More sharing options...
Ricky49 Posted July 14, 2011 Share Posted July 14, 2011 SRD turbo kit, manifold, dp, mp, all gaskets, seals etc etc a whole turbo package. A one stop shop so basically everything Quote Link to comment Share on other sites More sharing options...
Geo Posted July 14, 2011 Share Posted July 14, 2011 A card swipe machine. boom!! Quote Link to comment Share on other sites More sharing options...
JamieP Posted July 14, 2011 Share Posted July 14, 2011 Lap dancers and a coffee machine. Quote Link to comment Share on other sites More sharing options...
JakeG Posted July 14, 2011 Share Posted July 14, 2011 Haribo vending machine Quote Link to comment Share on other sites More sharing options...
Guest Nancy Posted July 14, 2011 Share Posted July 14, 2011 Lap dancers and a coffee machine. We can do the lapdancers but not sure about the coffee machine Quote Link to comment Share on other sites More sharing options...
jagman Posted July 14, 2011 Share Posted July 14, 2011 exchange suspension bush service - re bush arms etc on and exchange basis autodim rear view mirror both easy to provide .. Quote Link to comment Share on other sites More sharing options...
AlexM Posted July 14, 2011 Share Posted July 14, 2011 SRD Cupcakes. Quote Link to comment Share on other sites More sharing options...
Wez Posted July 14, 2011 Share Posted July 14, 2011 exchange suspension bush service - re bush arms etc on and exchange basis This would be a great idea, you could also offer a race bush setup which would differ slightly with less compliance, that way people could purchase and swap over themselves without needed a press to get the old ones out Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted July 14, 2011 Share Posted July 14, 2011 Lap dancers and a coffee machine. Club meet at Lee's place then Quote Link to comment Share on other sites More sharing options...
bradleyh_15 Posted July 14, 2011 Share Posted July 14, 2011 Lap dancers and a coffee machine. Club meet at Lee's place then is it going to be like a BBQ when you bring your own beer? So will we have to bring coffee or our own lapdancer Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted July 14, 2011 Share Posted July 14, 2011 Srd turbo heatsheilds, not many decent ones on the market. sand pitt and paddling pool would be ace too Quote Link to comment Share on other sites More sharing options...
Bailey. Posted July 14, 2011 Share Posted July 14, 2011 Srd dials possibly? Maybe a drive in drive out compound turbo kit?( too much?) Quote Link to comment Share on other sites More sharing options...
dandan Posted July 14, 2011 Share Posted July 14, 2011 Lap dancers and a coffee machine. This man knows his stuff Quote Link to comment Share on other sites More sharing options...
imi Posted July 14, 2011 Share Posted July 14, 2011 This would be a great idea, you could also offer a race bush setup which would differ slightly with less compliance, that way people could purchase and swap over themselves without needed a press to get the old ones out agree, great idea about the bushes. Quote Link to comment Share on other sites More sharing options...
Jamesy Posted July 14, 2011 Author Share Posted July 14, 2011 Ok thanx for all suggestions so far guys, keep them coming if u think of anything else. Will be putting it all together over next few days and see what super duper SRD ranges we can bring to you! Quote Link to comment Share on other sites More sharing options...
Guigsy Posted July 14, 2011 Share Posted July 14, 2011 I know it's not quite srd's thing but an off the shelf active spoiler would be good. Not motorised, purely cosmetic. People are always wanting just the blade but they are furiously expensive from Toyota. And some brackets to make it easy to mount. As mine was a pita. With a fmic it's real difficult. Nobody makes/sells headlight intakes. Doesn't need to be like jamie's one as that would be difficult to mass produce. but just something made of fibre glass that you could slot in place of the headlight to make it look nicer. Would be great if it could connect up to the airbox (the bit you can take out) so you remove the light and airbox front and slot it in. 3 guage pillar pod! Another thing people are always wanting. Quote Link to comment Share on other sites More sharing options...
Noz Posted July 15, 2011 Share Posted July 15, 2011 ive just made a triple pillar pod, pretty easy with right materials. cheap na-t kits are popular as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.