dude Posted July 4, 2011 Share Posted July 4, 2011 What lenth runs was the dyno set to? iirc default was 20sec, they seem go on forever and rather scarey, think Ryan changed it to 15 sec when we was doing my car. Edit.. looks like 15 second run in the video. 18 secs dude, I know I could not watch at first!!!! Just got to hope Carlmadboy does not want to race, I cant beat the G6 Supra !!!! innit Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 you'll have to change your avatar soon Hopefully !!!! Link to comment Share on other sites More sharing options...
Jamesy Posted July 4, 2011 Share Posted July 4, 2011 I only need 4 gears James it will do over 180 in 4th;) Thats a touch mate. See ya friday Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2011 Share Posted July 4, 2011 What's the sweep? Link to comment Share on other sites More sharing options...
Miguel Posted July 4, 2011 Share Posted July 4, 2011 Thanks El Miglet, it seems to rev forever, the sweep on the hub dyno feels like its torturing the car. I should think the amount of torture you have planned for the car doesn't even compare to what it's going through on the dyno If I had known you were up at TDI's today I would have popped in to say hi on my way past. Link to comment Share on other sites More sharing options...
Neil-NA Posted July 4, 2011 Share Posted July 4, 2011 Just got to hope Carlmadboy does not want to race, I cant beat the G6 Supra !!!! innit Congrats dude and all involved. Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 I should think the amount of torture you have planned for the car doesn't even compare to what it's going through on the dyno If I had known you were up at TDI's today I would have popped in to say hi on my way past. We are back from 8 tomorrow morning for prob 3 hours. Link to comment Share on other sites More sharing options...
DARETT Posted July 4, 2011 Share Posted July 4, 2011 Sound immense:D Scott, from what I gathered at Abbey's hub dyno the sweep is how long the actual run is on the dyno. The load is varied to allow it to rev a little quicker or slower. The standard sweep time is 20 on hub dyno's but can be reduced if needs be. Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 What's the sweep? The amount of time a 'pull' takes, much longer than a chassis/roller dyno Link to comment Share on other sites More sharing options...
DARETT Posted July 4, 2011 Share Posted July 4, 2011 Stock compression dude. Nitrous will be with Q16 for safety. Ah, that makes sense now Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2011 Share Posted July 4, 2011 Sound immense:D Scott, from what I gathered at Abbey's hub dyno the sweep is how long the actual run is on the dyno. The load is varied to allow it to rev a little quicker or slower. The standard sweep time is 20 on hub dyno's but can be reduced if needs be. The amount of time a 'pull' takes, much longer than a chassis/roller dyno Ahhah. So does the dyno actually hold the car back then? To stop the car from accelerating too quickly? Must be proper hard going on the engine. Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 Ah, that makes sense now The rear housing is a little large hence it really needs a 'sniff' to get her going Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 Ahhah. So does the dyno actually hold the car back then? To stop the car from accelerating too quickly? Must be proper hard going on the engine. Yes the dyno exerts a certain load, otherwise the turbo would never spool, its had 20 runs on this dyno and 50 on ours. Link to comment Share on other sites More sharing options...
DARETT Posted July 4, 2011 Share Posted July 4, 2011 Ahhah. So does the dyno actually hold the car back then? To stop the car from accelerating too quickly? Must be proper hard going on the engine. Yup, it attempts to mirror the load and resistance that the engine/hubs would see on the road. It does sound too hard when your car's on the dyno, especially on the long sweep's. But as it's all monitored etc it's safer than on the road. Link to comment Share on other sites More sharing options...
Miguel Posted July 4, 2011 Share Posted July 4, 2011 We are back from 8 tomorrow morning for prob 3 hours. Nuts, I'm in the opposite direction tomorrow:( Link to comment Share on other sites More sharing options...
DARETT Posted July 4, 2011 Share Posted July 4, 2011 The rear housing is a little large hence it really needs a 'sniff' to get her going A nice snort should see her break some 8's for sure Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2011 Share Posted July 4, 2011 Yes the dyno exerts a certain load, otherwise the turbo would never spool, its had 20 runs on this dyno and 50 on ours. Yeah I knew that it put a load on. Must be a strong bit of kit to slow down a 1000hp pull though Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 Yeah I knew that it put a load on. Must be a strong bit of kit to slow down a 1000hp pull though Very clever bit of kit Scott, I want 1 !!!! Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 A nice snort should see her break some 8's for sure I have the 400hp jets in, that should do !!!! Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2011 Share Posted July 4, 2011 What's the retail on one of those? Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 What's the retail on one of those? They do a 'tuner' version for 85K, TDI's was 250K apparently Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 What's the retail on one of those? More than you can afford...............................Ferrari !!!!! Sorry I just had too. Link to comment Share on other sites More sharing options...
Scott Posted July 4, 2011 Share Posted July 4, 2011 More than you can afford...............................Ferrari !!!!! Sorry I just had too. Of course.... why do you think I said it that way Link to comment Share on other sites More sharing options...
JamieP Posted July 4, 2011 Author Share Posted July 4, 2011 They do a 'tuner' version for 85K, TDI's was 250K apparently Nice kit but for that money Id rather a dynapack, Dans one was superb, he had the best fan setup ive seen an all, i think he said it was a 125k. Link to comment Share on other sites More sharing options...
dude Posted July 4, 2011 Share Posted July 4, 2011 Nice kit but for that money Id rather a dynapack, Dans one was superb, he had the best fan setup ive seen an all, i think he said it was a 125k. Just a shame you cant open the doors to get in, the Rotortest is accepted as being the blue riband of dynos !!!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now