dani_r Posted July 4, 2011 Share Posted July 4, 2011 (edited) Hello all! I changed my oil on Saturday, and whilst I had the undertray off I had a good poke around. The whole bottom of the engine was covered in oil, mostly old oil. But after looking around I've noticed it coming from the front part. I followed the trail all the way up and it finishes at the pulley tensioner area. I've taken the no 1 and 2 covers off to expose the front part as much as possible. I notcied I get a couple of drips of oil if the car is left for a week or so, no more than that. I figured it was the oil coming from the sandwich plate. I have attached pics, although they don't show too much detail so apologies for that. The oil seems to come down the right side (intake side) only. Any thoughts? Cheers Dan Edited July 4, 2011 by dani_r (see edit history) Link to comment Share on other sites More sharing options...
dani_r Posted July 4, 2011 Author Share Posted July 4, 2011 Pics: Link to comment Share on other sites More sharing options...
Chris Wilson Posted July 4, 2011 Share Posted July 4, 2011 Possibly cam seals, possibly cam covers need re torquing, possibly something else entirely. Needs a good steam clean with plenty of chemical detergent in the stream. Link to comment Share on other sites More sharing options...
dani_r Posted July 4, 2011 Author Share Posted July 4, 2011 Possibly cam seals, possibly cam covers need re torquing, possibly something else entirely. Needs a good steam clean with plenty of chemical detergent in the stream. Would it be an idea to change the cam seal? Or will that open a whole can of worms? If re-torqueing, is there a list of settings? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now