spiderpigcity Posted June 14, 2011 Share Posted June 14, 2011 Aem ems and a few questions I am wanting some answers if anyone can help me. I have read various forums and some contradict others. ok I have the AEM V1 installed on my t67dbb Supra We converted it from auto to manual v161 1. Do I lose ABS? 2. I know I lose traction control but is removing the bulb all i have to do as i now have my Triangle warning light on constantly 3. If i remove the trac control unit in the footwell do i lose ABS? do this cause any other problems 4. My engine check light no longer comes on, is this now on triggered outputs from my AEM EMS? If you can't answer all these is the triangle warning caused by the loss of traction control by connecting the new AEM EMS? and if so how do i turn it out? thanks Quote Link to comment Share on other sites More sharing options...
TLicense Posted June 14, 2011 Share Posted June 14, 2011 (edited) 1. No 2. No, there's a pin you either connect to live or unplug from the ECU. 22b sounds vaguely familiar, but it was 7 or 8 years ago that I did it. I'm sure it will be listed on here somewhere if you do a search. (I think either Wez or myself put a post up about it) 3. No. Just bin it, it's doing nothing for you now. 4. Only if you configure to be as such. Yes the triangle will be on because of the trac light. If you sort that out the light should go out. Edited June 14, 2011 by TLicense (see edit history) Quote Link to comment Share on other sites More sharing options...
TLicense Posted June 14, 2011 Share Posted June 14, 2011 In fact here you go... http://www.mkivsupra.net/vbb/showthread.php?104072-Aem-engine-warning-lights&p=1324827&viewfull=1#post1324827 Quote Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 15, 2011 Author Share Posted June 15, 2011 In fact here you go... http://www.mkivsupra.net/vbb/showthread.php?104072-Aem-engine-warning-lights&p=1324827&viewfull=1#post1324827 Thanks for that, i have spent all week searching and its all LHD USSPEC stuff. Or trac issues on the stock ECU. cheers Quote Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 15, 2011 Author Share Posted June 15, 2011 In fact here you go... http://www.mkivsupra.net/vbb/showthread.php?104072-Aem-engine-warning-lights&p=1324827&viewfull=1#post1324827 I have removed 29a which did nothing as described in the thread, 22b is blanked off with a yellow plug, so doesnt exist. I have looked at removing the egr sensor input on the ems but that doesnt exist on my jdm spec. It is the cat light that is causing the mil on. does anyone know what pin the cat light goes to on the ec,m cheers Quote Link to comment Share on other sites More sharing options...
TLicense Posted June 15, 2011 Share Posted June 15, 2011 Try pin A5. http://www.mkivsupra.net/vbb/showthread.php?104072-Aem-engine-warning-lights&p=1324807&viewfull=1#post1324807 Quote Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 15, 2011 Author Share Posted June 15, 2011 ok trying it now, fingers crossed or the whole car is going to be torched in 10 minutes Quote Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 15, 2011 Author Share Posted June 15, 2011 Try pin A5. http://www.mkivsupra.net/vbb/showthread.php?104072-Aem-engine-warning-lights&p=1324807&viewfull=1#post1324807 Thank god for that, 4 weeks that has taken me as i have had half the dash out thinking there was a leak to earth after i read 0.9v on one of the pins on the odo. you are a star. ****PIN A5**** you little ba**ard Quote Link to comment Share on other sites More sharing options...
bignum Posted June 15, 2011 Share Posted June 15, 2011 Ive got my warning triangle light as my rev limiter;) Quote Link to comment Share on other sites More sharing options...
pedrosixfour Posted June 15, 2011 Share Posted June 15, 2011 Ive got my warning triangle light as my rev limiter;) I have it as my ABS now disengaged indicator. Quote Link to comment Share on other sites More sharing options...
Wez Posted June 15, 2011 Share Posted June 15, 2011 Crikey, that was really back in 2007 Quote Link to comment Share on other sites More sharing options...
caseys Posted June 15, 2011 Share Posted June 15, 2011 Ive got my warning triangle light as my rev limiter;) This is full of win. I like that. Lots. Quote Link to comment Share on other sites More sharing options...
bignum Posted June 15, 2011 Share Posted June 15, 2011 Crikey, that was really back in 2007 Oh i was a year late then, 2008 i did mine:) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.