suprarob Posted July 7, 2005 Share Posted July 7, 2005 hi guy,s what is the best way to remove the front toyota emblem ? and how is it held on at the back ? just got a chrome stick on one to replace it Link to comment Share on other sites More sharing options...
Faye Posted July 7, 2005 Share Posted July 7, 2005 The back ones are just stuck on. The front is stuck on but has two pins holding it in place. Link to comment Share on other sites More sharing options...
colsoop Posted July 7, 2005 Share Posted July 7, 2005 I found the best thing to use was a bit of fishing line, or cotton thread And slowly work it underneath the logo in a sawing action to loosen the adhesive. there are two prongs that hold it to the bumper though. Link to comment Share on other sites More sharing options...
normore1 Posted July 7, 2005 Share Posted July 7, 2005 The front one has two post pins that hold it on the front cover. The best thing to do is pull back the cover and cut them from behind. You should be able to just undo the small bracket under the bonnet which is held in place by five plastic push pin clasps under the rubber seal. This will release the top part of the bumper cover enough for you to clip the emblem pins or pry off the little friction fittings that hold it in place. Link to comment Share on other sites More sharing options...
michael Posted July 7, 2005 Share Posted July 7, 2005 A few pics of 'what lies beneath' here: http://www.megaboost.co.uk/supra/mine/badge/ Link to comment Share on other sites More sharing options...
suprarob Posted July 7, 2005 Author Share Posted July 7, 2005 thanks guy,s I,m going to do this tomorrow so any more tips would be helpfull Link to comment Share on other sites More sharing options...
merckx Posted July 7, 2005 Share Posted July 7, 2005 Everything you need to know to do it properly has already been said! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now