fruity_south Posted May 21, 2011 Share Posted May 21, 2011 Evening all! I was just wondering if anyone could tell me, can u use a single piece prop on a supra? It's just with my v8 swap it seems to be a bit of a nightmare trying to make sure the measurements are right ect to have it shortened due to the measurements for the carrier. Would a single piece prop be ok to use if I got one made up. Far easier just taking one measurement from box to dif. Cheers Link to comment Share on other sites More sharing options...
mark newman Posted May 21, 2011 Share Posted May 21, 2011 single piece prop is good , if your doing a drag. Link to comment Share on other sites More sharing options...
fruity_south Posted May 22, 2011 Author Share Posted May 22, 2011 So it would be ok to get one made up for a show and drag car then? Link to comment Share on other sites More sharing options...
JamieP Posted May 22, 2011 Share Posted May 22, 2011 I have a single piece prop on my V8 supra, made by made by Dave-MAC propshafts, nuneaton, also got a carbon one to go on the black beast. Link to comment Share on other sites More sharing options...
fruity_south Posted May 22, 2011 Author Share Posted May 22, 2011 cheers jamie, i had a feeling that the one on your v8 was a single. so will be done! how are you liking it so far? jelous about the carbon, i would kill to have some on the v8 project but just dont have that sort of money for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now