pistol pete Posted May 17, 2011 Share Posted May 17, 2011 hi all.. how easy is it to change i need to do the drivers side as it is leaking at the back... any write ups on how to.. thanks.. Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2011 Share Posted May 17, 2011 I'd change both while your at it Quote Link to comment Share on other sites More sharing options...
keron Posted May 17, 2011 Share Posted May 17, 2011 the most common thing is the 10mm bolts/nuts loosen on them very easy. i dont think ive ever come accross one which has had not loosen up...just clean the area and re-torque them down...worth a try... Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 17, 2011 Share Posted May 17, 2011 Im pretty sure the reason the bolts loosen up is because the rubber type gasket dries up, goes very hard and shrinks, when i changed mine this was the case so personally i think the best fix is to replace them. Quote Link to comment Share on other sites More sharing options...
t-one234 Posted May 17, 2011 Share Posted May 17, 2011 mines just shat its self so thats on the cards for me to change in a few weeks leaking straight down the back and its making a mess so im going to clean up the back of the block aswell Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.