ManwithSupra Posted May 10, 2011 Share Posted May 10, 2011 Hi All, I wondered if anyone knew off the top of their head the size of clamp i will need for the throttle body on a TT? Rich Quote Link to comment Share on other sites More sharing options...
JamieP Posted May 10, 2011 Share Posted May 10, 2011 Dont bother, mikalor are sh1t, get a proper jubilee clip on it as they are far better at doing the job they are made for. Quote Link to comment Share on other sites More sharing options...
ManwithSupra Posted May 10, 2011 Author Share Posted May 10, 2011 Dont bother, mikalor are sh1t, get a proper jubilee clip on it as they are far better at doing the job they are made for. Ok mate cheers will do Quote Link to comment Share on other sites More sharing options...
Rajinder Posted May 10, 2011 Share Posted May 10, 2011 Mikalor are big, heavy and ugly. We have gone back to good quality jubilee clips after using mikalor. Quote Link to comment Share on other sites More sharing options...
ManwithSupra Posted May 11, 2011 Author Share Posted May 11, 2011 What sized jubilee clip do i need for the Throttle body Intake? I did write it down so i can pop into halfords on the way back from work tonight but i seem to have misplaced it lol. Quote Link to comment Share on other sites More sharing options...
Rajinder Posted May 11, 2011 Share Posted May 11, 2011 65/89 mm. Quote Link to comment Share on other sites More sharing options...
ManwithSupra Posted May 11, 2011 Author Share Posted May 11, 2011 Cheers dude Quote Link to comment Share on other sites More sharing options...
mplavery Posted May 11, 2011 Share Posted May 11, 2011 Dont bother, mikalor are sh1t, get a proper jubilee clip on it as they are far better at doing the job they are made for. I AGREE bought some as i had a turbo pipe keep coming off, I have not had a problem with the turbo pipes but i got some for the top hose and could not get a good seal....norm Jubilee's done the job in the end lol Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 11, 2011 Share Posted May 11, 2011 I've got them on my intercooler pipework and never had a problem, usually any problems stem from not having swaged ends on the pipe. I think their biggest downfall is you can easily over tighten them so you'd need to be very carefull on certain applications, obviously this isn't possible with the Jubilee style as they can only be tightened up so much before you strip the scroll. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.