spiderpigcity Posted May 3, 2011 Share Posted May 3, 2011 has anyone had a competition stage 5 , 4 paddle ceramic clutch with a stock flywheel? Are they drivable or are they like an on/off switch, could you hill start with one? Link to comment Share on other sites More sharing options...
Nic Posted May 3, 2011 Share Posted May 3, 2011 Do you have a link to what you mean? What hp is the car? Link to comment Share on other sites More sharing options...
Parry_10 Posted May 3, 2011 Share Posted May 3, 2011 I am running bpu with w58 gearbox and I have a competition clutch 6 puck one and it is like an on/off switch, pita in traffic and it is pretty juddery but it copes with the torque well never slipped once on me yet and im puttin 430lbsft of torque through it Link to comment Share on other sites More sharing options...
mwilkinson Posted May 3, 2011 Share Posted May 3, 2011 (edited) I thought you had to use one of their flywheels on the stage 4 and 5 clutches? I have a stage 4 going in my single build and I bought the lightweight flywheel too. Edit - only require uprated flywheel with 6 spd gearbox. Edited May 3, 2011 by mwilkinson (see edit history) Link to comment Share on other sites More sharing options...
spiderpigcity Posted May 4, 2011 Author Share Posted May 4, 2011 I have spoke to nearly every clutch company in the UK and lots of clutch specialists. Its a nightmare trying to find the right information. Crank walk if you go single, with a heavy pedal and on/of actuation. some clutches only run with specific flywheels, some need adaption kits for the throw on the slave cylinder. Twins make a noise and rattle on tickover, tripples even worse. 4 paddle and 6 paddle batter the lay shaft and internal bearings. I have heard it all. anyway in the end i spoke to MVP in USA and threw all these questions at him. He gave me a simple answer, this is from the guys who know everything about the supra and whos boss is currently driving a 1200rwhp road supra with no problems, and have used RPS clutches for years. they have bought the rights to RPS as they were going to stop manufacturing. anyway the simple answer was RPS stage 2 street disc for the cheap option with good drive-ability. or RPS twin plate for next option up. Seen as I am not going to drive the car much he said Stage 2 single would be fine. So MVP it was RPS it was. google ACT and they get slated google RPs and they get slated google SPEC and they get slated so i ignored google and went with the guys who have been doing it long enough to know. Link to comment Share on other sites More sharing options...
JamieP Posted May 4, 2011 Share Posted May 4, 2011 Ive always used RPS, brilliant clutches imo, my street max did 20,000 hard miles at 600-700bhp and still going when removed, now on RPS CC and holding my power well, done about 8,000 miles so far. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now