Bailey. Posted May 2, 2011 Share Posted May 2, 2011 Today was the first attempt to start my single build, problem is the fuel pump only kicks into to purge when you turn the ignition on about 1 out of 10 times you try it, The setup i have is Hks f con Standard(blitz access) ecu 800cc low impedence injectors Heckler resistor pack sard fpr All the car did originally was start and once running cut out, and now it does this every now and again in between not starting at all. Tomorrow i will check voltage to the pump, pump ecu connections and relays etc. Anyone else have any ideas? Im not really worried, as im sure its something silly, but any other ideas would be helpful, and may shed some light on this issue. Heres a small vid of it starting Link to comment Share on other sites More sharing options...
Guest ugp Posted May 2, 2011 Share Posted May 2, 2011 Tried manually running the pump? Link to comment Share on other sites More sharing options...
aman00123 Posted May 2, 2011 Share Posted May 2, 2011 Sure you've set up the fuel pressure properly? Silly thing but you never know Link to comment Share on other sites More sharing options...
Bailey. Posted May 3, 2011 Author Share Posted May 3, 2011 Yep first port of call is check all plugs etc, and if nothing then for the minute I will put a direct feed to the pump, I will also check the relays for the pump are working everytime and not just now and again!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now