fastnfurious Posted April 29, 2011 Share Posted April 29, 2011 (edited) physically, it's still connected except "dangling in the air" now since it can no longer clip (brittle and broken into pieces) to the metal base... Edited April 29, 2011 by fastnfurious (see edit history) Quote Link to comment Share on other sites More sharing options...
absz Posted April 29, 2011 Share Posted April 29, 2011 its the oxygen sensor plug, cant you just fit a cable tie round the plug back onto the bracket. Quote Link to comment Share on other sites More sharing options...
fastnfurious Posted April 29, 2011 Author Share Posted April 29, 2011 that sounds practical but my concern is, it may get worst as this connector is already so brittle... Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 29, 2011 Share Posted April 29, 2011 Which half is damaged, the plug on the O2 sensor lead, or the socket on the engine loom? Quote Link to comment Share on other sites More sharing options...
fastnfurious Posted April 29, 2011 Author Share Posted April 29, 2011 (edited) hi Chris, it's the top/outer piece which slide into the base metal holder... not too sure if the part no. is 90980-11028 or could be something else? Edited April 29, 2011 by fastnfurious (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.