peter richards Posted April 22, 2011 Share Posted April 22, 2011 spent a bit of time down the old mans house today , cleaned the car it came up nice got all the green crap off but it was protected and that did make the clean easier . now its been standing for 18+ months and the brake discs look very rusty , so dont know if a good drive when i tax and mot it will clean them off or am i looking at new discs Link to comment Share on other sites More sharing options...
Havard Posted April 23, 2011 Share Posted April 23, 2011 Give it a drive and see how they go. They always look worse than they are..!! Link to comment Share on other sites More sharing options...
peter richards Posted April 23, 2011 Author Share Posted April 23, 2011 thanks mate , fingers crossed Link to comment Share on other sites More sharing options...
merckx Posted April 23, 2011 Share Posted April 23, 2011 My car hasn't been on the road for the same length of time. I'm going to get the wire brush in the drill to clean mine up, give them a good inspection and checking that the calipers haven't seized. Much better than using the pads to clean them up. Link to comment Share on other sites More sharing options...
Purity14 Posted April 23, 2011 Share Posted April 23, 2011 Just go for a drive, then lightly left foot brake for a while.. job done Link to comment Share on other sites More sharing options...
merckx Posted April 23, 2011 Share Posted April 23, 2011 I like to do things properly. Link to comment Share on other sites More sharing options...
peter richards Posted April 27, 2011 Author Share Posted April 27, 2011 ok booked the car in for an MOT tomorrow so thought id go and see if i could clean the discs up and generally check everything out . but before i even got out of the drive the indicators wont work , hazzards as well , took it for a run and sorted out the discs they seem to be ok . had to cancel the MOT now until i get the indicators working , dropping it off at an auto electrician in the morning , all the other lights are ok , checked the fuses and they seem good Link to comment Share on other sites More sharing options...
bodilx6 Posted April 28, 2011 Share Posted April 28, 2011 A quick and easy fix for rust on brake disk are just to emerge them in some vinegar. That removes rust quite quickly... No need to wear your discs on it Link to comment Share on other sites More sharing options...
Wez Posted April 28, 2011 Share Posted April 28, 2011 Just go for a drive, then lightly left foot brake for a while.. job done I do the same thing quickly followed by a spirited drive and some proper braking Link to comment Share on other sites More sharing options...
Ark Posted April 28, 2011 Share Posted April 28, 2011 ok booked the car in for an MOT tomorrow so thought id go and see if i could clean the discs up and generally check everything out . but before i even got out of the drive the indicators wont work , hazzards as well , took it for a run and sorted out the discs they seem to be ok . had to cancel the MOT now until i get the indicators working , dropping it off at an auto electrician in the morning , all the other lights are ok , checked the fuses and they seem good Have you had the dash out recently? I dropped one of the connectors doing that once (the one for the hazard lights) and that stopped the indicators working. Link to comment Share on other sites More sharing options...
peter richards Posted April 28, 2011 Author Share Posted April 28, 2011 (edited) just picked it up it needed a new flasher unit cost me £60 fitted . so getting there slowly, the only other problem is it seems to be missing on idle , could it be the fact its been standing and a good blast will sort it out , cant do that until i get the MOT and tax. oh and the O/D off lights flashing now and again Edited April 28, 2011 by peter richards (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now