Robzki Posted April 19, 2011 Share Posted April 19, 2011 Hi all I'm looking for a k type thermocouple to measure egt's Its to fit on a plx devices module, this has a yellow female socket with 2 pins, 1 bigger than the other. As you can tell I know absolutely nothing about this, except for the fact that I think £75 is a bit of a painful price for one. which is what plx want. I seem to remember that inconel is the one to go for especially as I'm planning on fitting it pre turbo. I'm also not sure if they are pre calibrated? seem to recall that the length of cable makes a difference? If anyone has one knocking around(new) or any advice on where to get a decent one at a good price with boss? I'd prefer not to go down the ebay route, even though they seem stupidly cheap at times. Unless someone in the know advises me differently Thanks Rob Quote Link to comment Share on other sites More sharing options...
Wez Posted April 19, 2011 Share Posted April 19, 2011 Chris Wilson can source these for you or may have one in stock Quote Link to comment Share on other sites More sharing options...
Robzki Posted April 19, 2011 Author Share Posted April 19, 2011 Thanks Wez, much appreciated. I was sure I'd had a conversation with someone last year about it. Now you've said it I'm sure it was Chris, must be my age. I'll send him an email Cheers Rob Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 20, 2011 Share Posted April 20, 2011 I have Inconel 3mm probes and stainless manifold fittings in stock. E-mail me for a price. I don't sell the cheap stainless ones which can melt or break causing turbo damage. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.