spiderpigcity Posted April 18, 2011 Share Posted April 18, 2011 [ATTACH]131848[/ATTACH] I ordered these a while back, fitted them to the car, turned it over to make sure the setup was running ok on the base MAP, turned the car back off. went to the tuner, he said go for 1000cc as it would suit my setup better. so we took them out and here they are for sale. They havnt even done 1 mile! I will send them next day special delivery good for 500-600 bhp with the right setup. LOW IMPEDANCE, Flowed at 43.5 psi, Domestic type 14mm dia rail side. will fit Boost Logic Fuel Rail, WOTM Fuel Rail, SP Fuel Rail, and the Titan Fuel Rail and others, or any fuel rail with 14mm top feed inlets. they cost around $700 with shipping and import tax, so are a bargain, with no hassle with customs.£225. posted with £500 insurance Delphi 75lb/hour 750cc low impedance fuel injector: Genuine Delphi 75 lb/hour Low Impedance Injectors These injectors flow 750 cc/min at 43.5 PSI ( 3 BAR ). Some websites may refer to their flow rating as 75 lb/hr or 750/780 cc/min Delphi Peak and Hold or Low-Z Injectors. These high flow injectors offer an excellent spray cone and very good response but should not be pushed to very high static rail pressures. These injectors offer excellent response and atomization but should not be run at excessive rail pressures due to the disc design. Higher rail pressures with boosted / supercharged applications are acceptable with a pressure referenced fuel regulator because the pressure differential remains unchanged. FEATURES: Genuine, reliable, new Delphi Injectors Excellent response characteristics Robust Design Low Impedance ADVANTAGES: The flat mating surface ensures that no excess fuel is present to evaporate and therefore, no deposits or clogging can occur. Long service life High-speed disc action allows wider dynamic flow range for improved idling Quiet operation Revolutionary disc design resists build up deposits which can affect fuel flow No Fuel leakage for quicker starts Specifications: Coil Resistance: 2 Ohms / Low Impedance Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 750 cc/min = 75 lb/hr = 12 gm/s Connector: Bosch EV1 Ball & Seat / Disc design with 6 Hole orifice Equivalent Part Numbers: Delphi 17113742 Manufactured by: Delphi Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 6, 2011 Author Share Posted June 6, 2011 Link to comment Share on other sites More sharing options...
caseys Posted June 6, 2011 Share Posted June 6, 2011 erm.... with that last attachment isn't this thread a bit.. NWS? Link to comment Share on other sites More sharing options...
dive_popo Posted June 6, 2011 Share Posted June 6, 2011 dibs on the girl and free bump to your post cheers Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 6, 2011 Author Share Posted June 6, 2011 erm.... with that last attachment isn't this thread a bit.. NWS? The girl works for us, she is our courier. Link to comment Share on other sites More sharing options...
caseys Posted June 6, 2011 Share Posted June 6, 2011 The girl works for us, she is our courier. Still chap, some of us occasionally browse this forum at work, and at work we're not meant to look at images like that... hence there's the NWS section. Link to comment Share on other sites More sharing options...
Steve Posted June 6, 2011 Share Posted June 6, 2011 Picture removed. Can you please be careful about what images you upload outside the NWS area. Link to comment Share on other sites More sharing options...
spiderpigcity Posted June 17, 2011 Author Share Posted June 17, 2011 Link to comment Share on other sites More sharing options...
spiderpigcity Posted August 11, 2011 Author Share Posted August 11, 2011 Link to comment Share on other sites More sharing options...
spiderpigcity Posted August 27, 2011 Author Share Posted August 27, 2011 reduced to £225 posted to clear. Link to comment Share on other sites More sharing options...
spiderpigcity Posted October 5, 2011 Author Share Posted October 5, 2011 Reduced price its a bargain, they are new, thats 6 injectors, YES 6 injectors. I can't believe this crazy price. For all you tight ars!s out there who don't want to pay for anything here is your dream come true. £175 posted to England PM me Link to comment Share on other sites More sharing options...
bignum Posted October 5, 2011 Share Posted October 5, 2011 My dream come true would be if they were free:) Link to comment Share on other sites More sharing options...
spiderpigcity Posted October 5, 2011 Author Share Posted October 5, 2011 I can do them for free but postage will be £175, is that ok? Link to comment Share on other sites More sharing options...
Terminator Posted October 5, 2011 Share Posted October 5, 2011 Good injectors for a daft price. You may sell for more on ebay.Free bump. Link to comment Share on other sites More sharing options...
spiderpigcity Posted October 5, 2011 Author Share Posted October 5, 2011 they cost more than that for 2. OK price going up a £5 a day now £180 Link to comment Share on other sites More sharing options...
bignum Posted October 6, 2011 Share Posted October 6, 2011 I can do them for free but postage will be £175, is that ok? Great, i`m down your way next week actually, ok to collect. Link to comment Share on other sites More sharing options...
spiderpigcity Posted October 6, 2011 Author Share Posted October 6, 2011 Great, i`m down your way next week actually, ok to collect. yes , PM'd with details Link to comment Share on other sites More sharing options...
spiderpigcity Posted October 7, 2011 Author Share Posted October 7, 2011 they cost more than that for 2. OK price going up a £5 a day now £180 now £185 Link to comment Share on other sites More sharing options...
Recommended Posts