Silece2k6 Posted April 18, 2011 Share Posted April 18, 2011 hey guys, suddenly my indicators won't work. wenn I use the switch, nothink happens. no click,click,click or green arrows are going on... Maybe a fuse is damaged? but where is the Indicator Fuse? Does anyone has a Fusebox wiring diagram or something? and I need the color of wires from the Ignition: so Ignition, Acc and constant + Link to comment Share on other sites More sharing options...
ripped_fear Posted April 18, 2011 Share Posted April 18, 2011 the fuse boxs are - one under the bonnet, one in the drivers foot well, on the right, its a PITA to get to! Link to comment Share on other sites More sharing options...
Nic Posted April 19, 2011 Share Posted April 19, 2011 As said, check the fuse, see attached.FUSES_AND_CIRCUIT_BREAKERS.PDF Link to comment Share on other sites More sharing options...
heckler Posted April 19, 2011 Share Posted April 19, 2011 hey guys, suddenly my indicators won't work. wenn I use the switch, nothink happens. no click,click,click or green arrows are going on... Maybe a fuse is damaged? but where is the Indicator Fuse? Does anyone has a Fusebox wiring diagram or something? and I need the color of wires from the Ignition: so Ignition, Acc and constant + Is that both indicators? As they both go through the hazard warning switch, if that's unplugged, the indicators don't work Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 What you mean "hazard warning Switch"? The Fuses are all ok -.-. I remember, when I turn the Switch, 'Nothing' Happens no click, click or Indikator arrows are going. Complete Dead! Link to comment Share on other sites More sharing options...
heckler Posted April 20, 2011 Share Posted April 20, 2011 the switch on the top of the dash, 4-way flasher? sets all the indicators off at once... Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 Okaaaaay?? Sry I don't Know what Switch you mean Link to comment Share on other sites More sharing options...
heckler Posted April 20, 2011 Share Posted April 20, 2011 Its a switch with a red triangle on it, sat next to the ODO/warning lights... Link to comment Share on other sites More sharing options...
Silece2k6 Posted April 20, 2011 Author Share Posted April 20, 2011 oh man the connector on the back of the Hazard Warning was not connected... Kick Ass by myself thank you. but what are the 3 wires of the Ignition? Need it for my Turbotimer. Link to comment Share on other sites More sharing options...
spikedjack Posted December 9, 2013 Share Posted December 9, 2013 I'll bump this in case anyone else has this problem. I had the issue today where neither my hazards nor my indicators would work. Turns out there was a blown 15 amp fuse in the engine bay (hazards) which when replace made my hazards work but not the indicators, and also a blown 7.5 amp fuse in the drivers footwell which when replace made the hazards work. Might be of use for someone in the same situation as me Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now