Jellybean Posted May 5, 2011 Author Share Posted May 5, 2011 Does anybody know where I could get a schematic to tell me what each pin is on the speedo loom Link to comment Share on other sites More sharing options...
Scott Posted May 5, 2011 Share Posted May 5, 2011 I'm not suggesting you do this but if I were in this situation where I couldn't get it show the fault unless moving I would ferris bueller it. Axle stands on the rear, chock up the front, engine on, 3rd gear, clutch out and away we go. From there just poke and prod at stuff till you can simulate the error Link to comment Share on other sites More sharing options...
Jellybean Posted May 5, 2011 Author Share Posted May 5, 2011 I'm not suggesting you do this but if I were in this situation where I couldn't get it show the fault unless moving I would ferris bueller it. Axle stands on the rear, chock up the front, engine on, 3rd gear, clutch out and away we go. From there just poke and prod at stuff till you can simulate the error Was going to do that and rule out the loom Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now