1993 1/2 supra 2jz-ge to J spec 2jz-gt3 vvti engine swap 1997.8 engine

[Guest Kmichael]

Hi to all,We are currently tring to complete this supra non turbo auto open rear to a twin turbo 6 spd limited slip rear car. Swap 95% completed and car running at adle only. Not 100% sure if upper fuse area is right. The body plug has 3 wires black white and black,red.Engine has 5 wires black white black,red and blue,red. We hooked up black to black white to white black,red to both black,red wires on engine.The blue,red wire we wired to a 15amp fuse think it goes to the ecu c7. Could anyone help us if wiring is right and if so any other help on car idle only Thanks, Kmichael

[Scooter]

This link may help............

 

http://www.mkivsupra.net/vbb/showthread.php?156635-NA-to-TT-conversion-problems&highlight=wiring

[Scooter]

and this one...page 2......

 

http://www.mkivsupra.net/vbb/showthread.php?136136-NA-to-TT-engine-transplant-step-by-step-guide-(Pic-heavy)&highlight=wiring

Edited April 17, 2011 by Scooter (see edit history)

[Guest Kmichael]

Thanks for your help

[EMPEROR]

UPPER FUSEBOX CONNECTOR for VVTi TT:

 

No code has to be inserted here.

Edited April 19, 2011 by EMPEROR (see edit history)

[EMPEROR]

Ops double post... sorry...