Hobgoblin Posted April 16, 2011 Share Posted April 16, 2011 Hi all. I have bought a set of oe alloys for my RX8, so that I can have them colour matched to the car (gunmetal grey). The car is off to the painters in a few weeks for a few small areas of bodywork, and I will get the painter to spray the wheels at the same time. They are already in pretty good condition, a small bit of pitting, I am going to prepare them for painting myself, just to be certain it is done thoroughly. One of them has quite a nick out of it, it is too deep to rub down, so I need to use filler, but the question is, do I use an ordinary body filler, or must I get something more specific to wheels? Cheers Quote Link to comment Share on other sites More sharing options...
Dnk Posted April 17, 2011 Share Posted April 17, 2011 Repair it properly and get it welded Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.