RobD Posted March 23, 2011 Share Posted March 23, 2011 Used but in good condition, all cables included but no instructions, you'll also need some pipe for the boost to run through £175 delivered Link to comment Share on other sites More sharing options...
Lee_e Posted March 23, 2011 Share Posted March 23, 2011 Is this easy to install / set up myself ? Link to comment Share on other sites More sharing options...
RobD Posted March 24, 2011 Author Share Posted March 24, 2011 I wouldn't know mate, I've never fitted one, bought this of a mate and was going to fit to my TT engine but going single now so I'll let the ecu do all the work I'm pretty sure you'll be able to find instructions somewhere online, from what I can see most of the loom is plug and play but there's a few wires that'll need a feed an earth etc Link to comment Share on other sites More sharing options...
Lee_e Posted March 24, 2011 Share Posted March 24, 2011 mmm so tempting.... what size is the circumference ? 52mm or 60mm ... so i know if it will fit in either my A pillar or my clock hole. Link to comment Share on other sites More sharing options...
RobD Posted March 24, 2011 Author Share Posted March 24, 2011 Pretty sure it's 52mm, I'll double check tomorrow, I was eyeing it up for the clock hole also so pretty sure it's 52mm I'll measure tomorrow and let you know Link to comment Share on other sites More sharing options...
Lee_e Posted March 24, 2011 Share Posted March 24, 2011 cheers dude, if its 52mm.... would you accept £150 posted Link to comment Share on other sites More sharing options...
RobD Posted March 24, 2011 Author Share Posted March 24, 2011 Make it £160 you've got a deal Link to comment Share on other sites More sharing options...
RobD Posted March 26, 2011 Author Share Posted March 26, 2011 Bump, this is 60mm Link to comment Share on other sites More sharing options...
RobD Posted April 1, 2011 Author Share Posted April 1, 2011 Bump Link to comment Share on other sites More sharing options...
Scott Posted April 1, 2011 Share Posted April 1, 2011 Hmmm, tempting. After anything for swaps? Link to comment Share on other sites More sharing options...
RobD Posted April 1, 2011 Author Share Posted April 1, 2011 what have you got? Link to comment Share on other sites More sharing options...
Scott Posted April 1, 2011 Share Posted April 1, 2011 Tinted Rear Pre-Facelift lights (2 sets now) Refurbished (facelifted) Pre-facelift headlights (almost ready) Stock Intake Manifold Stock Throttle Body Stock Filter Box & Intake Bits 17" Advan Super Racing Alloys MR2 T-Bar Bags (Black) MR2 T-Bar Blinds (Grey) MR2 Window Controls (Pass & Driver) Etc Link to comment Share on other sites More sharing options...
RobD Posted April 1, 2011 Author Share Posted April 1, 2011 Sold Link to comment Share on other sites More sharing options...
Recommended Posts