Matt _Aero top_ Posted March 21, 2011 Share Posted March 21, 2011 (edited) Hi folks Just a general question to you members who have the whifbitz cat back system fitted to there supras . On the backbox what type of rubber do you use on the hanger ? I feel mine may look a tad low , not sure whether I can get a smaller rubber dounut type thing or if it's just streched slightly over the years . Thanks Matt Edited March 21, 2011 by Matt _Aero top_ (see edit history) Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 22, 2011 Author Share Posted March 22, 2011 Anyone Link to comment Share on other sites More sharing options...
Josh Posted March 22, 2011 Share Posted March 22, 2011 Ask Paul as I'm sure he'd know the best way to attach the backbox to the hanger. Link to comment Share on other sites More sharing options...
marcAB10 Posted March 22, 2011 Share Posted March 22, 2011 Maybe use 2 rubber hangers as it will stretch them less and not hang as low, that's if you have enough room for 2, I'm not sure on that exhaust myself. Link to comment Share on other sites More sharing options...
caseys Posted March 22, 2011 Share Posted March 22, 2011 I've used two rubber hangers but find after a little while they start perishing - maybe it's the angle my downpipe is at though as I'm no longer TT. I have a 3.5" system and find I'm probably changing the rubbers every 9 months - Don't know if it's the angle or the weight to be honest. I've tried various shapes/sizes of exhaust rubbers but all in the end stretch and perish I have found. I was looking at cutting a bit more of one of the hangers off so I could get a better angle and get a poly ring put on, but maybe I'll just try and wait it out until I've changed the downpipe and manifold then just get the exhaust tweaked for a better alignment. Link to comment Share on other sites More sharing options...
Supra Gaz Posted March 22, 2011 Share Posted March 22, 2011 You can pick them up at halfords in different sizes Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 22, 2011 Author Share Posted March 22, 2011 I'll have a look . The one I'm using at the minute is one I used on my old dragger , well there was 2 I just picked the best of the pair , I'll try halfords at the weekend . Link to comment Share on other sites More sharing options...
Josh Posted March 22, 2011 Share Posted March 22, 2011 I'll have a look . The one I'm using at the minute is one I used on my old dragger , well there was 2 I just picked the best of the pair , I'll try halfords at the weekend . Call ahead, when I went after I got my new exhaust they didn't have any "rubber rings" or anything like them. Link to comment Share on other sites More sharing options...
Paul Whiffin Posted March 22, 2011 Share Posted March 22, 2011 Hi folks Just a general question to you members who have the whifbitz cat back system fitted to there supras . On the backbox what type of rubber do you use on the hanger ? I feel mine may look a tad low , not sure whether I can get a smaller rubber dounut type thing or if it's just streched slightly over the years . Thanks Matt Hi Matt, have you got 2 on the back mount? Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 23, 2011 Author Share Posted March 23, 2011 Hi Paul No I only have one on the rear Link to comment Share on other sites More sharing options...
Paul Whiffin Posted March 23, 2011 Share Posted March 23, 2011 Hi Paul No I only have one on the rear You should have 2, thats your problem. Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 24, 2011 Author Share Posted March 24, 2011 I can't upload pictures from my iPhone for some reason but the rubber I'm using looks like a round dounut with two bigger bits on it 180 degrees from each other . Hope this makes sence , is this the correct type ? iv so I'll pick another one up today Link to comment Share on other sites More sharing options...
Paul Whiffin Posted March 24, 2011 Share Posted March 24, 2011 I can't upload pictures from my iPhone for some reason but the rubber I'm using looks like a round dounut with two bigger bits on it 180 degrees from each other . Hope this makes sence , is this the correct type ? iv so I'll pick another one up today There should be 2 round rings on the back? Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted March 24, 2011 Author Share Posted March 24, 2011 Ok cheers Paul . Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now