Jump to content
The mkiv Supra Owners Club

Couple of teaser pictures!


JamieP

Recommended Posts

  • Replies 409
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i thaught it was important tom plumb the breathers into the turbo inlet to keep it i negative pressure? i used to run a breather to catch can and the can to atmosphere and it used to fill the can pretty quick. since i put the can into the inlet it stoped it breathing oil so heavily.

 

video?

Link to comment
Share on other sites

She lives:cool:

 

hahahaha lovin this thread been following it for a while and it just gets beter!!! sure suprapod has been mentioned and if your there jamie im defo doing the 160mile drive to come see the car in the flesh.

 

top project/dedication/planning by everyone involved and good luck with the running in and expected turbo!:Pling:

 

craig

Link to comment
Share on other sites

i used to run a breather to catch can and the can to atmosphere and it used to fill the can pretty quick. since i put the can into the inlet it stoped it breathing oil so heavily.

 

Sounds like there is another issue there as it should hardly fill the can at all, plus if the can is now empty where do you think its all gone, back through the inlet which isnt a nice thought either.

Link to comment
Share on other sites

Just uploading the start up video.

 

 

 

i thaught it was important tom plumb the breathers into the turbo inlet to keep it i negative pressure? i used to run a breather to catch can and the can to atmosphere and it used to fill the can pretty quick. since i put the can into the inlet it stoped it breathing oil so heavily.

 

video?

 

Sounds like you have a engine problem, most likely shot rings, its not filling the can any more because the vacuum is pulling the oil into your turbo.

Link to comment
Share on other sites

10min of upload remaining:D this is an actual first start up an all, we had a small issue with the fuel pump controller jumping between high and low voltage in the first start up, Ryan soon sorted it though, on the next start up it was held at 2500rpm for 20min as part of SRD bedding in the new engine, all was spot on, no leaks or issues.

 

Lee really is the man, a superb job he has done, best in the game by a long way, there is nothing that man does not know about Supras.:cool:

Link to comment
Share on other sites

Sounds like there is another issue there as it should hardly fill the can at all, plus if the can is now empty where do you think its all gone, back through the inlet which isnt a nice thought either.

 

yea thaught that too :) not worried , new motor soon , come on vid

Link to comment
Share on other sites

Good day today mate she sound's awesome, it was good to get a little background on what goes into getting it started.

 

Never seen Lee look so nervous I had to take himfor a BK to settle his nerves.

 

Excellent machine you have there mate and well done to Lee for all his hard work.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.