Havard Posted March 17, 2011 Share Posted March 17, 2011 woohoo fixed it all by myself lol. only cost me a set of plugs,rotor arm,dizzy cap and ht leads So about £200 then..!! Quote Link to comment Share on other sites More sharing options...
Biguns Posted March 17, 2011 Author Share Posted March 17, 2011 erm yeah:-\ Quote Link to comment Share on other sites More sharing options...
Purity14 Posted March 17, 2011 Share Posted March 17, 2011 So about £200 then..!! Alot more apparently..! Quote Link to comment Share on other sites More sharing options...
Havard Posted March 17, 2011 Share Posted March 17, 2011 Alot more apparently..! How? I thought £200 was spot on. £107.00 for the leads, £45 for iridium plugs, can't be more than £50 for a dizzy and rotor arm. Quote Link to comment Share on other sites More sharing options...
Biguns Posted March 17, 2011 Author Share Posted March 17, 2011 was a bit less as got bits off ebay but close havard Quote Link to comment Share on other sites More sharing options...
Neil-NA Posted March 17, 2011 Share Posted March 17, 2011 How? I thought £200 was spot on. £107.00 for the leads, £45 for iridium plugs, can't be more than £50 for a dizzy and rotor arm. Maybe because in a previous thread he had posted a link to some magnecor leads he had bought for around £175. Quote Link to comment Share on other sites More sharing options...
Rob Posted March 17, 2011 Share Posted March 17, 2011 Don't split the throttle body from the Y-pipe, else you'll need a new gasket from Toyota. Quote Link to comment Share on other sites More sharing options...
Biguns Posted March 17, 2011 Author Share Posted March 17, 2011 i did split the throttle body from the y-pipe , gasket seems ok, as for the magnecor leeds they aint turned up yet so had to fit some blue print ones as a temp measure to get me going. Quote Link to comment Share on other sites More sharing options...
nevins Posted March 18, 2011 Share Posted March 18, 2011 Next time just split the manifold on the right hand side as you look at it and leave the TB on it. Its a lot easier this way. Quote Link to comment Share on other sites More sharing options...
Rob Posted March 18, 2011 Share Posted March 18, 2011 i did split the throttle body from the y-pipe , gasket seems ok, as for the magnecor leeds they aint turned up yet so had to fit some blue print ones as a temp measure to get me going. Workshop manual lists the gasket as a non-reusable part. As new it has a crushable centre ridge. Quote Link to comment Share on other sites More sharing options...
Biguns Posted March 18, 2011 Author Share Posted March 18, 2011 Ah crap don't suppose u got a part number, or I could just add gasket sealant Quote Link to comment Share on other sites More sharing options...
Rob Posted March 25, 2011 Share Posted March 25, 2011 Big delay. Not to hand no, sorry, but a decent Toyota parts guy will track it down in no time. I bought a few back when I was trying to sole my high idle problem. Quote Link to comment Share on other sites More sharing options...
wallis Posted March 26, 2011 Share Posted March 26, 2011 I would just go single.......lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.