csa Posted March 9, 2011 Share Posted March 9, 2011 (edited) I need to fit a Boostlogic turbo oil feed, but I'm missing the male/male converter from the oil feed hole on the side of the block (next to the waterpump) the oil feed line has e JIC / AN male in each end, but what threadsize is the hole in the block? Looking at the BL kit, it's brass coloured male male converter in the middle of the picture: http://www.boostlogic.com/images/parts/general/SupraOilFeedAndReturn.jpg ...but what are the sizes on it? Edited March 9, 2011 by csa (see edit history) Quote Link to comment Share on other sites More sharing options...
hodge Posted March 9, 2011 Share Posted March 9, 2011 M12 x 1.25mm is the thread in the block IIRC Quote Link to comment Share on other sites More sharing options...
csa Posted March 9, 2011 Author Share Posted March 9, 2011 thanks! Allready found them on thinkauto :-) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.