seba Posted March 8, 2011 Share Posted March 8, 2011 (edited) Found these brakediscs today they are the larger TT ones Jspec. How do i know if they are still ok? I'm pretty sure i can clean them up a lot better. Here's a pic of one i went over quickly with some sandpaper. Found them together with the 4pod brakes that go along. Never had a TT don't know how they got in the shed How do you guys clean this stuff or get the rust of? Most importantly what do i have to look out for to know if they can still be used? Edited March 8, 2011 by seba (see edit history) Quote Link to comment Share on other sites More sharing options...
Nic Posted March 8, 2011 Share Posted March 8, 2011 Front 4pot Brake Disc - 323mm x 30mm (28mm minimum thickness) Rear 2pot Brake Disc - 324 x 16mm (15mm minimum thickness) Quote Link to comment Share on other sites More sharing options...
Tyson Posted March 9, 2011 Share Posted March 9, 2011 Make sure they are not pitted or scored mate and then check thickness as above. Quote Link to comment Share on other sites More sharing options...
seba Posted March 9, 2011 Author Share Posted March 9, 2011 Ok thx i checked they are between 31-32mm so should be ok. What does pitted or scored mean You just mean damaged like little bumps in them or something? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.