SupraDan24 Posted February 5, 2011 Share Posted February 5, 2011 I've just bought a Top Secret II Bumper last week and i'm currently repairing it ready to be fitted. I had a look today to see how to get the old one off and TS on when i noticed the lights on my OEM bumper looked too big for the holes in the TS. Sure enough, i measured them and they're a cpl inches too big. Is it because they're facelift ones? Which ones do i need to get to fit the TS bumper? Secondly, i noticed there's no holes for the front indicators Am i right in thinking you need these to pass MOT? Pics below Dan Quote Link to comment Share on other sites More sharing options...
DodgyRog Posted February 5, 2011 Share Posted February 5, 2011 (edited) The Type 2 takes the pre facelift orange indicators the Type 3 takes the facelift ones you have on your old bumper From your pics, if you fit the orange indicators, you will then also have a problem, as you will need sidelights as well In pre facelift models the sidelights were in the headlight Edited February 5, 2011 by DodgyRog (see edit history) Quote Link to comment Share on other sites More sharing options...
Nic Posted February 5, 2011 Share Posted February 5, 2011 Top Secret Bumper Type II - Pre-facelift indicators. http://www.jm-imports.co.uk/carimages/toyota/2007/supra14/1.jpg Top Secret Bumper Type III - Facelift indicators. Quote Link to comment Share on other sites More sharing options...
SupraDan24 Posted February 5, 2011 Author Share Posted February 5, 2011 Oh dear, so i have the wrong bumper then lol I didnt realise there was a difference between the two. Would it be easier to just sell the one i have and wait for a Type 3 would you say, or try to modify the one i have? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.