barneybrendan Posted January 21, 2011 Share Posted January 21, 2011 (edited) we have wired in the emu to the na loom and cannot get the car started no fuel delivery and no spark.Feel free to have a look at how we have wired it in and let me know if we have gone wrong somewhere.EM Wiring.xls Edited January 21, 2011 by barneybrendan (see edit history) Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted January 21, 2011 Share Posted January 21, 2011 What is PIM vacuum sensor? doesn't the N/A have MFA? (sorry not familiar with N/A) apart from that i can't see any glaring problems, but i will go through it again more thoroughly, you should go for the RPM tach signal for RPM, as you will not get a reliable signal from either the crank or cam angle sensors, at least i never could with the TT. Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted January 21, 2011 Author Share Posted January 21, 2011 (edited) theres the problem the na is map based so thats fine ,but i have no crank/cam angle sensor on the na. found this on na-t forumEmanageUltimate_Wiring nat.pdf Edited January 21, 2011 by barneybrendan (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.