Rob_Mitchell Posted February 29, 2012 Author Share Posted February 29, 2012 You must be bored Rob, whens the car back? you taking it to Japfest? like you wouldnt believe. Lee is going to try and get it done for April, so i might be able to make it, fingers crossed... i just hope it all goes smoothly. Link to comment Share on other sites More sharing options...
Scott Posted February 29, 2012 Share Posted February 29, 2012 That's came out brilliant Link to comment Share on other sites More sharing options...
ripped_fear Posted February 29, 2012 Share Posted February 29, 2012 Like that, should look great in the bay along with the rest of the gold. Link to comment Share on other sites More sharing options...
Westy Posted February 29, 2012 Share Posted February 29, 2012 Nice work there Rob! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 29, 2012 Author Share Posted February 29, 2012 Cheers guys. Might do the FMIC Panel, as i decided to buy a fresh one off SRD anyway Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 1, 2012 Author Share Posted March 1, 2012 Keep bugging Lee for things to do, he has kindly sent me a couple of jubilee clips for the bottom hose. Mirror polished these today so they are perfect for tonights 24ct gold bath.. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 1, 2012 Author Share Posted March 1, 2012 Bling Bling Link to comment Share on other sites More sharing options...
safcdixon Posted March 1, 2012 Share Posted March 1, 2012 Bling Bling http://www.mkivsupra.net/vbb/attachment.php?attachmentid=147274&stc=1&d=1330622579 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=147275&stc=1&d=1330622579 http://www.mkivsupra.net/vbb/attachment.php?attachmentid=147276&stc=1&d=1330622579 Lol Those look mint!!! Rob you are taking the perfection thing too a whole different level Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 1, 2012 Author Share Posted March 1, 2012 Lol Those look mint!!! Rob you are taking the perfection thing too a whole different level Im a freak aint i?? lmao. Link to comment Share on other sites More sharing options...
supradibbs Posted March 3, 2012 Share Posted March 3, 2012 like you wouldnt believe. Lee is going to try and get it done for April, so i might be able to make it, fingers crossed... i just hope it all goes smoothly. You can forget that mate am heading back to the UK for a visit, so Lee will be mostly getting drunk with me! Link to comment Share on other sites More sharing options...
Ricky49 Posted March 3, 2012 Share Posted March 3, 2012 You can forget that mate am heading back to the UK for a visit, so Lee will be mostly getting drunk with me! Redbull Vodkas at the ready Link to comment Share on other sites More sharing options...
supradibbs Posted March 3, 2012 Share Posted March 3, 2012 Redbull Vodkas at the ready Never forget JAE 3 years ago Lee doing the bar tender part extra large measures, queue me and Lee rocking the empty dance floor with some killer moves! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 5, 2012 Author Share Posted March 5, 2012 (edited) Been trying to get all parts together to make my custom stainless steel under bonnet heat tray. Im going to make templates up when i get the bonnet and ill send the templates to be cut out in mirror stainless steel. I have got some really nice gold caps to go around the edge of the stainless. I have also ordered a 6"x3" mirror polished brass plaque to be mounted on the centre heatsheild GOLD RUSH SUPRA Special thanks DARNLEY AUTOWORKS SUPRA RACING DEVELOPMENTS GARAGE WHIFBITZ 2BARTUNING DM-MOTORSPORT EXTREME PERFORMANCE SBA-TUNING Without the above company names i have had on the plaque the car wouldnt be, so im very grateful to all of you guys and the help i have recieved from you all during the build Edited March 5, 2012 by Rob_Mitchell (see edit history) Link to comment Share on other sites More sharing options...
Tee from China Posted March 6, 2012 Share Posted March 6, 2012 Hi how big is that under-bonnet heat tray going to be? will it just be over the engine or like those you get for Chrysler PT Cruisers that encase the whole engine? Link to comment Share on other sites More sharing options...
TheTurtleshead Posted March 6, 2012 Share Posted March 6, 2012 IMO bud, stick the plate on a little stand/spec list thing you can put next to the car at shows. You know one of those things you can drive on to hold it down? I think the less badging/name plates and things the better, could look a bit nafftastic imo, will reserve judgement till I see it though! And it is your car after all! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 6, 2012 Author Share Posted March 6, 2012 Hi how big is that under-bonnet heat tray going to be? will it just be over the engine or like those you get for Chrysler PT Cruisers that encase the whole engine? Its going straight down the middle of the bonnet. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 6, 2012 Author Share Posted March 6, 2012 IMO bud, stick the plate on a little stand/spec list thing you can put next to the car at shows. You know one of those things you can drive on to hold it down? I think the less badging/name plates and things the better, could look a bit nafftastic imo, will reserve judgement till I see it though! And it is your car after all! Yeah that was my other idea but i wont know what it looks like on the sheild till i make it, would look sweet in the place i have in mind. Link to comment Share on other sites More sharing options...
JamieP Posted March 6, 2012 Share Posted March 6, 2012 Its going straight down the middle of the bonnet. Needs the two side bits doing an all imo. Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 6, 2012 Author Share Posted March 6, 2012 Needs the two side bits doing an all imo. Yeah thats where my idea comes into play. As soon as i get a bonnet or borrow a bonnet ill be full steam on it. Link to comment Share on other sites More sharing options...
Jamesy Posted March 6, 2012 Share Posted March 6, 2012 Yeah thats where my idea comes into play. As soon as i get a bonnet or borrow a bonnet ill be full steam on it. you can borrow my bonnet, as long as you leave the prototype attached to it once ya finished Link to comment Share on other sites More sharing options...
Josh Posted March 6, 2012 Share Posted March 6, 2012 Been trying to get all parts together to make my custom stainless steel under bonnet heat tray. Im going to make templates up when i get the bonnet and ill send the templates to be cut out in mirror stainless steel. I have got some really nice gold caps to go around the edge of the stainless. I have also ordered a 6"x3" mirror polished brass plaque to be mounted on the centre heatsheild GOLD RUSH SUPRA Special thanks DARNLEY AUTOWORKS SUPRA RACING DEVELOPMENTS GARAGE WHIFBITZ 2BARTUNING DM-MOTORSPORT EXTREME PERFORMANCE SBA-TUNING Without the above company names i have had on the plaque the car wouldnt be, so im very grateful to all of you guys and the help i have recieved from you all during the build No mention of MKIVSupra.net? Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 6, 2012 Author Share Posted March 6, 2012 Lee sent the brand new FMIC panel with some nice stickers, going to do the same thing as i done with the Radiator panel tonight. Im only doing half the panel tonight. I really like this idea and its something totally new. Panel all ready for 24ct gold treatment!! Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted March 6, 2012 Author Share Posted March 6, 2012 Plated one half of the FMIC panel, didnt realise it would cost me nearly £150-200 in gold but it looks good so thats all that matters. Just need to plate the other side, just waiting on a sticker. Link to comment Share on other sites More sharing options...
Guigsy Posted March 6, 2012 Share Posted March 6, 2012 Looks like cardboard to me mate... Link to comment Share on other sites More sharing options...
JamieP Posted March 6, 2012 Share Posted March 6, 2012 Lol, you have lost the plot Rob. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now