TT Paul Posted December 19, 2010 Share Posted December 19, 2010 got the info but just wondered if someone could confirm a comment turn sensor clockwise until ohmmeter deflects and then tighten screws.. Qs. 1. what ohm setting should multimeter be on 2. and what does deflect mean i guess resistance??:search: thanks... Link to comment Share on other sites More sharing options...
sparkystav Posted December 19, 2010 Share Posted December 19, 2010 Till the ohms starts to change i'd guess it means mate, so that itll register something as soon as you press the pedal. and as for the resistance start at the top and work down is my advice if you dont have an autoranging unit. Link to comment Share on other sites More sharing options...
Lee P Posted December 19, 2010 Share Posted December 19, 2010 Just to clarify this is for the sub throttle TPS, the reason its a pain is it works in reverse. The butterfly rests open so the ecu needs to see the correct resistance or it will give an error. You have pm Link to comment Share on other sites More sharing options...
TT Paul Posted December 19, 2010 Author Share Posted December 19, 2010 Just to clarify this is for the sub throttle TPS, the reason its a pain is it works in reverse. The butterfly rests open so the ecu needs to see the correct resistance or it will give an error. You have pm cheers lee it same for both as in ohmmeter deflects Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now