Jellybean Posted December 16, 2010 Share Posted December 16, 2010 What is the benefit of a Titan Crank pulley vs Toyota OEM? With plans to future proof her for single Link to comment Share on other sites More sharing options...
Geo Posted December 16, 2010 Share Posted December 16, 2010 well my view is that the OEM one will be fine upto a certain power lever, Mr Toyota put loads of R&D into there pulley. iv just bought and ordered a new OEM one to give to Lee for my build. Im sure it will be fine running about 650-700bhp. Some might have different views but thats just mine. Link to comment Share on other sites More sharing options...
Jellybean Posted December 16, 2010 Author Share Posted December 16, 2010 well my view is that the OEM one will be fine upto a certain power lever, Mr Toyota put loads of R&D into there pulley. iv just bought and ordered a new OEM one to give to Lee for my build. Im sure it will be fine running about 650-700bhp. Some might have different views but thats just mine. Thats cool if OEM will survive that power level, I just want a GTX35R so it should well be within its limits Hopefully though we will get more detail from one of the Tuners Link to comment Share on other sites More sharing options...
Terminator Posted December 16, 2010 Share Posted December 16, 2010 I think the issue with standard crank pulley is the de-lamination which inevitably occurs, but this is associated with age on standard cars. The factory fitted pulley ie the original, tends to fail earlier on higher powered cars, so it could be suggested that they wont last as long on a high powered car. However we are talking about components that are over ten years old that are failing, so unless you are planning a significant rpm rise and really big power, you should be fine with a new stock pulley. Link to comment Share on other sites More sharing options...
supra dan Posted December 16, 2010 Share Posted December 16, 2010 the titan one is on special if you are quick http://www.mkivsupra.net/vbb/showthread.php?235251-Deal-of-the-Week.. Link to comment Share on other sites More sharing options...
Chris Wilson Posted December 16, 2010 Share Posted December 16, 2010 It boosts the US economy and degrades the engine, IMHO. If you read the data below it explains why. http://www.bhjdynamics.com/downloads/pdf/tech/BHJDynamics_Damper_Info.pdf Link to comment Share on other sites More sharing options...
Lee P Posted December 16, 2010 Share Posted December 16, 2010 I would go with a new stock one, I run that on mine and it's been fine. It's only if it's very old it becomes an issue. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now