Parry_10 Posted December 7, 2010 Share Posted December 7, 2010 hi everyone im looking for 10 wheel nuts no more than 20mm in diameter Link to comment Share on other sites More sharing options...
Guest wantthatone Posted December 7, 2010 Share Posted December 7, 2010 i have a bag with locking nuts & a key, there the tapered base type Link to comment Share on other sites More sharing options...
Parry_10 Posted December 7, 2010 Author Share Posted December 7, 2010 ok mate im not sure if they are the ones i need? i have a j spec car 12.125, need 10 nuts so i can fit my front spacers to clear my new uk calipers Link to comment Share on other sites More sharing options...
Guest wantthatone Posted December 7, 2010 Share Posted December 7, 2010 you just want the nuts to fix the spacers on to the studs on the hubs? then you will use the studs on the spacers to fit your alloys? is this right? Link to comment Share on other sites More sharing options...
Parry_10 Posted December 7, 2010 Author Share Posted December 7, 2010 yes thats all i want them for bud but for the spacers i need the nuts to be chamfered which my current wheel nuts are so ive put those on the spacers at the minute Link to comment Share on other sites More sharing options...
Guest wantthatone Posted December 7, 2010 Share Posted December 7, 2010 ok, so you want nuts with a m/c seat. im not sure mate, have you a nut & bolt company near you, take the spacer along & they should sort you out buddy;) Link to comment Share on other sites More sharing options...
Parry_10 Posted December 7, 2010 Author Share Posted December 7, 2010 yeh true but what im saying is i can use my wheel nuts for the spacers so ill need 10 wheel nuts to replace the ones im now using to bolt the spacers on Link to comment Share on other sites More sharing options...
Guest wantthatone Posted December 7, 2010 Share Posted December 7, 2010 how wide are your spacers 1" Link to comment Share on other sites More sharing options...
Parry_10 Posted December 7, 2010 Author Share Posted December 7, 2010 not to sure id say around that yes maybe less Link to comment Share on other sites More sharing options...
tango Posted December 25, 2010 Share Posted December 25, 2010 Is that safe? I though you should use the longer bolt go from back of hub through to the front of wheels? Link to comment Share on other sites More sharing options...
RobSheffield Posted December 25, 2010 Share Posted December 25, 2010 Wouldnt you be better off with properly sized wheels that go over UK calipers? At worst id go with the small spacer and slightly longer stud. Link to comment Share on other sites More sharing options...
Recommended Posts