djg99 Posted November 16, 2010 Share Posted November 16, 2010 When fitting a FMIC do you have to remove the stock airbox as im finding it hard to get the pipe to fit! or can the air box be modifed so that the pipe fits?? I did do a search but with no luck!!! Quote Link to comment Share on other sites More sharing options...
Lude Posted November 16, 2010 Share Posted November 16, 2010 i would say it needs to be removed, as the airbox is quite large & gets in the path of the IC pipes, remove the airbox, fit the IC, then see if you can fit the filter/aitbox after Quote Link to comment Share on other sites More sharing options...
djg99 Posted November 16, 2010 Author Share Posted November 16, 2010 Doh!! Didn't think of that, cheers! Quote Link to comment Share on other sites More sharing options...
Nic Posted November 16, 2010 Share Posted November 16, 2010 Most branded FMIC's are designed to fit with the stock airbox, most of the cheap Ebay FMIC's will not fit with the stock airbox. You'll need to either modify the air box/pipe, or fit an aftermarket induction kit. Quote Link to comment Share on other sites More sharing options...
Dnk Posted November 16, 2010 Share Posted November 16, 2010 Mine fits but i made my own hard pipes with silicon connectors, its a squeeze but it fits. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.