black_widow87 Posted November 15, 2010 Share Posted November 15, 2010 Im currently running 415bhp at 0.9bar and hoping to get the boost up and re-map in the new year. When i had the first map done i was hoping for 500bhp to begin with but apparently the was some sort of misfire when ever the boost went above 1 bar. I was advised to fit a DLI twin spark to solve the problem but heard here on the forum that its not needed unless i have the AEM standalone. Im currently using the AEM FIC. Im wondering if maybe the plugs my not be up for the job. What you guys reckon? Quote Link to comment Share on other sites More sharing options...
Nic Posted November 15, 2010 Share Posted November 15, 2010 Full spec of the car would help. Quote Link to comment Share on other sites More sharing options...
black_widow87 Posted November 15, 2010 Author Share Posted November 15, 2010 Garret T04B, 550cc injectors, resistor pack, walbro pump, AEM FIC, NGK BKR7E-11 plugs Quote Link to comment Share on other sites More sharing options...
Paul Whiffin Posted November 15, 2010 Share Posted November 15, 2010 Have you checked the coil pack clips? Thats the first place to look, how old are the plugs? And what plugs are they? If the clips and plugs are ok next step is the coil packs themselves. Thanks Paul Quote Link to comment Share on other sites More sharing options...
Steve Posted November 15, 2010 Share Posted November 15, 2010 What gap have you got your spark plugs set to? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.