Black_Supra Posted November 9, 2010 Share Posted November 9, 2010 Hey Guys, i am fitting a fmic and i had to take off the original power steering oil cooler, now i bought a new one but i need 2 lines in and out for the cooler because the stock lines are to short. Is it on high pressure, what for lines i could take ? WBR Quote Link to comment Share on other sites More sharing options...
bignum Posted November 9, 2010 Share Posted November 9, 2010 The cooler is on the return so low pressure, i used some hydraulic hose of the same diameter with no problems. Quote Link to comment Share on other sites More sharing options...
Andy Blyth Posted November 9, 2010 Share Posted November 9, 2010 Quote Link to comment Share on other sites More sharing options...
2soops Posted November 10, 2010 Share Posted November 10, 2010 I cheated with mine and carefully bent the cooling pipe until it wasn't in the way anymore. Not the right way to do it i know!!! Quote Link to comment Share on other sites More sharing options...
Black_Supra Posted November 10, 2010 Author Share Posted November 10, 2010 Bought yesterday 10 MM Steel Pipes and a Pipeflexer ... now i will flex my own cooler ... for the ends i got 10 MM Hydraulic tubs ... we will see ... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.