sim1987 Posted November 6, 2010 Share Posted November 6, 2010 Hi all just been browsing the mvp motorsport web page and found somthing that is disturbing me as i have been looking for a set of intake and exhaust cams and then i read this Quote: you can not put an aftermarket exhaust camshaft in any year Non-Turbo, only an intake cam. i just want to confirm this if this is true or not Link to comment Share on other sites More sharing options...
RobSheffield Posted November 6, 2010 Share Posted November 6, 2010 Doesnt the dissy run off the exhaust cam? Maybe thats why, unless its made to use the dissy drive gear, or you upgrade/change to coil on plug like the TT. Link to comment Share on other sites More sharing options...
Jay_vr6 Posted November 6, 2010 Share Posted November 6, 2010 yep exhaust cam runs the dizzy, never seen a set available for intake and exhaust, maybe worth asking Dude as he has been getting some cams made recently.. Link to comment Share on other sites More sharing options...
Chris Wilson Posted November 6, 2010 Share Posted November 6, 2010 Piper or Kent Cams will do one offs, or maybe they will re grind the existing profile, but you'd end up with a smaller base circle diameter, meaning you'd need different cam followers made. Depending how much smaller the base circle ends up you MIGHT get away with thicker shims. None of this will be cheap. Link to comment Share on other sites More sharing options...
sim1987 Posted November 7, 2010 Author Share Posted November 7, 2010 cheers for the advise even if i just changed the intake cam would it make a notacable difarence. Link to comment Share on other sites More sharing options...
Dazzi Posted November 7, 2010 Share Posted November 7, 2010 there are other companies in the states that sell na cams, they are just regrings. Link to comment Share on other sites More sharing options...
sim1987 Posted November 7, 2010 Author Share Posted November 7, 2010 there are other companies in the states that sell na cams, they are just regrings. would you be able to tell me any of these companys so i can do some looking round cheers. Link to comment Share on other sites More sharing options...
dr_jekyll Posted November 7, 2010 Share Posted November 7, 2010 pm dude from afr, he can do na in and exhaust cams at a verry decent price Link to comment Share on other sites More sharing options...
sim1987 Posted November 7, 2010 Author Share Posted November 7, 2010 (edited) dude pm'd cheers. Edited November 7, 2010 by sim1987 (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now