David Reid Posted October 26, 2010 Share Posted October 26, 2010 AEM peak and hold unit Bought from Terminator to use with my AEM unit which didnt work so I never used it. Copy and paste of the advert:- Used AEM 10 channel peak and hold driver works perfectly. Used but supplied with brand new leads and fitting pack full printed instruction. Used instead of a resistor pack to make low duty of low imp injectors easier to control. Complete kit; two brand new looms, new fixing kit, but I recommend soldered connections, new fuse and holder, instructions and the all important AEM sticker. If the buyer wanted to use soldered connections, I'll chuck in enough shrink wrap for the job. If you have RACE LOGIC TC this unit is wired between the ECU and the RL connections. Note the serial number. Early AEM P&H drivers had problems with the circuit board. The problem was fixed on Serial no's 300 and upwards. I just want what I paid £105 delivered Greddy Profec B Boost controller Just removed from my car as the Syvecs ECU is now handling boost control. £120 delivered SOLD T4 Hybrid turbonetics Forsale T4 hybrid turbo, I used this on my drift car and should be good for 500 bhp. I was pulling 1bar by approx 3000 rpm. Now the bad bit, unfortunated I didnt check the oil feed before fitting and it had a restrictor, and I starved the core or oil. But its journal bearing so an easy repair, turbonetics quoted £250 to rebuild. Or I think (and dont garrentee) you could buy this either of these rebuild kits/core and do a cheap rebuild then just have it balanced. New core £65 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120520457691&ssPageName=STRK:MEWAX:IT Rebuild kit £75 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=130346972291&ssPageName=STRK:MEWAX:IT I want £100 for it, take a chance and it may may make a very cheap turbo for someone. Collection prefered so that you can make sure you are happy with it This is what the turbo looked like fitted Will come with my V band adaptor This is what it now looks like:- XS Power 60 mm external wastegate Comes with all flanges V band clips and a selection of springs £90 delivered SOLD Getrag 6 speed salve cylinders I dont know how, but after buying all the bits for a manual conversion I am left with 2 slave cylinders (Red and Gold) Red is TT 6spd Gold is NA 6spd I am not sure what they are worth so £30 each £35 posted TT Jspec Fuel pump £20 SOLD BPU Spark plugs Will add spec and picture these have been used for approx 1 hour. Removed as my mapped recommended lower grade plugs for the high boost I am now running £20 Assorted TT pipes Forsale assorted twin turbo pipes as pictures Offers will split £40 Link to comment Share on other sites More sharing options...
David Reid Posted October 26, 2010 Author Share Posted October 26, 2010 Garrett braided oil feed for 2jz single This would suit GT30,35R ect I used it on a T4 hybrid The adaptor bolts straight to the garret core and the banjo used the standard supra bolt (which I will include). The turbo fitting has a restrictor to suit ball bearing core, if this is not needed simply drill out. I have removed as I am now using a Borg Warner which has a completely different oil feed. There are pictures of it fitted in my thread, below is what you get £20 collected £25 delivered SOLD Large Tail replica dump valve http://www.magix-photos.com/mpfw01/10/B9/E2/A1/E0/90ED11DEA3DB0909D4B78641/C2E59BD090ED11DE99B92C180939C481.jpg £35 delivered FSE Power boost valve Looks brand new and came with a GT4 I bought recently http://www.magix-photos.com/mpfw01/10/DF/87/52/10/90ED11DE98DE49D1D4B78641/E54B9BC090ED11DEAB38F8AA6BA6A762.jpg UK Manual ECU Fully working ran my car last week £65 delivered UK Fuel rail Powder coated black £15 delivered Link to comment Share on other sites More sharing options...
Andy Blyth Posted October 26, 2010 Share Posted October 26, 2010 Would you take £10 for the two BOV hoses with clips delivered? Link to comment Share on other sites More sharing options...
SupraShaun Posted October 27, 2010 Share Posted October 27, 2010 I notice there are some VSVs on the turbo pipes, do you happen to have an IACV (Intake Air Control Valve) VSV as pictured here: http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13935&d=1112558800 ? Link to comment Share on other sites More sharing options...
David Reid Posted October 27, 2010 Author Share Posted October 27, 2010 Would you take £10 for the two BOV hoses with clips delivered? £12 and you have a deal if you high light which items in the pictures they are Link to comment Share on other sites More sharing options...
David Reid Posted October 27, 2010 Author Share Posted October 27, 2010 I notice there are some VSVs on the turbo pipes, do you happen to have an IACV (Intake Air Control Valve) VSV as pictured here: http://www.mkivsupra.net/vbb/attachment.php?attachmentid=13935&d=1112558800 ? I think I have that I will put a pictur up to confirm tonight Link to comment Share on other sites More sharing options...
SupraShaun Posted October 27, 2010 Share Posted October 27, 2010 I think I have that I will put a pictur up to confirm tonight Ok great Link to comment Share on other sites More sharing options...
Andy Blyth Posted October 27, 2010 Share Posted October 27, 2010 £12 and you have a deal if you high light which items in the pictures they are You drive a hard bargain David! OK, it's these two hoses with their clips: Let me know how you'd like payment. Cheers Andy Link to comment Share on other sites More sharing options...
SupraShaun Posted October 29, 2010 Share Posted October 29, 2010 I think I have that I will put a pictur up to confirm tonight Did you have this VSV David? Link to comment Share on other sites More sharing options...
David Reid Posted November 3, 2010 Author Share Posted November 3, 2010 Did you have this VSV David? Sorry for the delay in getting back to you. The parts list is updated and anyone who bought anything should now have recieved it. Is the VSV any of these:- Link to comment Share on other sites More sharing options...
SupraShaun Posted November 3, 2010 Share Posted November 3, 2010 Sorry for the delay in getting back to you. The parts list is updated and anyone who bought anything should now have recieved it. Is the VSV any of these:- No worries. I dont think so, this is what I need: http://supra.sh-designs.biz/iacv.jpg Link to comment Share on other sites More sharing options...
Recommended Posts