pedrosixfour Posted October 11, 2010 Share Posted October 11, 2010 Need a few bits to complete the 1JZ engine swap in my Supra plus a few aero mods. At the minute I'm looking for: Second rear diff mount, found on turbo Supras, but not on NA's. I'm sure theres lots more bits I'm missing but don't know about yet so this could be a lengthy thread! Any help on parts needed would be great. Thanks y'all. Damien. Link to comment Share on other sites More sharing options...
cjesus Posted October 11, 2010 Share Posted October 11, 2010 I have a stock BOV JZA80 TT 1993, sell for £25 shipped to you... let me know Link to comment Share on other sites More sharing options...
little num Posted October 12, 2010 Share Posted October 12, 2010 I have a stock BOV JZA80 TT 1993, sell for £25 shipped to you... let me know Unfortunatly the 1JZ bov is totally different to the 2JZ so no use to him. Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 12, 2010 Author Share Posted October 12, 2010 Unfortunatly the 1JZ bov is totally different to the 2JZ so no use to him. Just what I was about to say! Thanks for the offer anyway buddy. Link to comment Share on other sites More sharing options...
Swampy442 Posted October 12, 2010 Share Posted October 12, 2010 Yup Ive got a 1JZ bov kicking about if you want it. Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 12, 2010 Author Share Posted October 12, 2010 Yup Ive got a 1JZ bov kicking about if you want it. I certainly do. PM me what you want for it. Cheers. Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 12, 2010 Author Share Posted October 12, 2010 I also need a TT power steering reservoir or other suitable tank, not sure about the related plumbing until I check whats on the 1JZ. Would a larger capacity than stock tank be of benefit to the p.s. system in a racing environment? i.e. less chance of the oil overheating/overflowing due to a larger reserve. Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 15, 2010 Author Share Posted October 15, 2010 Swampy, any update on the BOV mate? Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 20, 2010 Author Share Posted October 20, 2010 BOV sorted. Link to comment Share on other sites More sharing options...
pedrosixfour Posted October 23, 2010 Author Share Posted October 23, 2010 Bump Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 17, 2010 Author Share Posted November 17, 2010 Bump. Link to comment Share on other sites More sharing options...
little num Posted November 17, 2010 Share Posted November 17, 2010 what parts you need bud, i may have an acclerator cable and powersteering resvoire. Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 18, 2010 Author Share Posted November 18, 2010 what parts you need bud, i may have an acclerator cable and powersteering resvoire. Definitely a cable and the reservoir for starters James, a restrictor ring for a 2.5" system would also be needed as I won't be running any Cat but I'm not too worried about hunting that one down, for now. I'm also guessing I'll need oxygen (lambda) sensors suitable for the 1JZ (these are still needed even if I want to run an AFR meter, aren't they?). I'm sure theres a lot more that I don't know I need yet but will discover as the swap progresses. I'm still stuck in the middle of rebuilding the W58 but fingers crossed there should be light at the end of that particular tunnel all thanks to dr_jekyll. This means I'm not actually stuck for engine parts just yet but I'm trying to gather them up before I do need them so the project doesn't grind to a complete stop, again. Link to comment Share on other sites More sharing options...
pedrosixfour Posted November 26, 2010 Author Share Posted November 26, 2010 bumpski Link to comment Share on other sites More sharing options...
pedrosixfour Posted December 9, 2010 Author Share Posted December 9, 2010 Up we go. Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 14, 2011 Author Share Posted January 14, 2011 New year bump. All parts needed now listed in the first post. Link to comment Share on other sites More sharing options...
straightsix Posted January 14, 2011 Share Posted January 14, 2011 Do you still need power steering reservoir? Not sure it would be any use but I did find one for an N/A in the garage last night Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 14, 2011 Author Share Posted January 14, 2011 Do you still need power steering reservoir? Not sure it would be any use but I did find one for an N/A in the garage last night NA & TT reservoirs are different buddy. I need the TT version. Thanks for taking the time to offer though. Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 20, 2011 Author Share Posted January 20, 2011 Wishlist updated. Any assistance on any part would be most appreciated. Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 20, 2011 Share Posted January 20, 2011 New laser cut restrictor rings at £11 plus VAT. P&P is 2.80 plus VAT to UK postcodes S Ireland will need quoting on, if that's where you are.. I also have the correct high temp gaskets that can be re used a few times if needed. E-mail if interested, no PM please Thanks. Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 20, 2011 Author Share Posted January 20, 2011 New laser cut restrictor rings at £11 plus VAT. P&P is 2.80 plus VAT to UK postcodes S Ireland will need quoting on, if that's where you are.. I also have the correct high temp gaskets that can be re used a few times if needed. E-mail if interested, no PM please Thanks. E-mail on it's way Chris. Can't wait to read the reply to that one! Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 21, 2011 Author Share Posted January 21, 2011 Restrictor ring and related gaskets sorted. Thank you Chris. Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 24, 2011 Author Share Posted January 24, 2011 Bumpity boo. Link to comment Share on other sites More sharing options...
pedrosixfour Posted January 27, 2011 Author Share Posted January 27, 2011 bump Link to comment Share on other sites More sharing options...
pedrosixfour Posted February 7, 2011 Author Share Posted February 7, 2011 Restrictor ring and gaskets received this morning Chris. Thank you very much sir. Link to comment Share on other sites More sharing options...
Recommended Posts