Wheels again

[gjp]

I may be changing my std 17" wheels to some 18"

Can I have some opinion's on the size's I'm looking at

 

18 x 8 45 offset 235/40/18 front

 

18 x 9 35 offset 265/35/18 rear

 

It is only an na with bpu

[Jamesy]

pretty skinny mate .... are u fussed if they fill the arches? if you are these aren't for you unless u use spacers

[Dnk]

18 x 8.5 on the front and 18 x 9.5 on the rear, not sure on the front offset but the rear should be 35

 

Check out pjavon's car, thats on the sizes above with no rubbing and looks spot on to me. Heres a side shot of his car.

Edited October 1, 2010 by Dnk (see edit history)

[bodilx6]

These should fit fine. I don't agree with them being skinny as they are close to stock except for the slightly more agressive offset. Don't go lower in offset.

[jackso11]

35 offset front and back with 8.5 and 9.5J will fill the arches.

[Jamesy]

18x8 +45 Front

18x9 +35 Rear

 

This is not an agressive setup and it wont fill the arches in my opinion .... maybe im a bit off the mark as i try to go huge on the wheels are low on the offset for my personal taste ... but on my old set up i had 18x8.5 fronts PLUS a 15mm spacer