Jump to content
The mkiv Supra Owners Club

SRD Stage 1, 2 and 3 Camshafts


Lee P

Recommended Posts

Our latest range of 2JZ camshafts now made from billet for the ultimate quality.

 

Jamesy and Ricky49 have stage 2 in there cars. They have both made over 700hp on T67 turbos and the torque holds really well all the way to red line.

 

Jamiep is running the stage 3 280 cams with great results, 1298hp at 2.2bar and again holding torque well to the 8200rpm limit.

 

Stage 1: 264 9.5mm lift

 

Will run with stock springs but may need a reshim

 

 

Stage 2: 269 9.6mm lift

 

Will need a spring upgrade and may need a reshim

 

 

Stage 3: 280 10.2mm lift

 

Will need a spring upgrade and may need a reshim. Would advise shimless buckets and Head modification would also be good with these cams to make the most of them.

 

The price is £1044 + del

 

 

Cheers

 

Lee

Edited by Lee P (see edit history)
Link to comment
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Hi Lee - has anyone tried your stage 1 cams yet or better still, do you have any comparative dyno plots against the stockers?

 

I am considering going for a set of mild cams but to be honest I'm only thinking about it at this stage as I'd something that has benefits inside the stock rev limit and doesn't dump a load of grunt below 4000rpm compared to the stock cams.

Link to comment
Share on other sites

Hi Lee - has anyone tried your stage 1 cams yet or better still, do you have any comparative dyno plots against the stockers?

 

I am considering going for a set of mild cams but to be honest I'm only thinking about it at this stage as I'd something that has benefits inside the stock rev limit and doesn't dump a load of grunt below 4000rpm compared to the stock cams.

 

I had the stage 1 in my car sometime ago, they are basically very similar to the HKS 264 but slightly improved. You should see very little low down loses but gain at the top end. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.