Jellybean Posted September 20, 2010 Share Posted September 20, 2010 Hey just wanted to ask about the LED’s I got; they are the Philips Blue Vision. I put then in yesterday and they look fantastic but the passenger side is a lot brighter, nearly twice the luminance. I had the Ebay ones in before and they only seem to last a short while, the passenger side was flicking on and off so just got the Philips. But in saying that Ebay LED on the Drivers side was fine but now with the Philps LED it is giving issues(half the brightness). What is the best approach to test if it is the LED or the Power Source. With my car it is a head light out to get at them so it’s a pain in the A$$ I am right in saying it is more likely the LED than the power source, because they are philps I would expect quality to be there though Quote Link to comment Share on other sites More sharing options...
SteveC Posted September 20, 2010 Share Posted September 20, 2010 You're going to need to get to them to try swapping the bulbs over, and for testing the bulbs out of the connectors. Only then will you know for certain if it's a bulb or a connection/wiring problem. Quote Link to comment Share on other sites More sharing options...
JakeG Posted September 20, 2010 Share Posted September 20, 2010 Somethimes with them LEDs there is only one way they wil go in and you just need to turn the LEDs over and plug them in the other way Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.