Rinus Posted September 17, 2010 Share Posted September 17, 2010 Hi guys, I'm getting this week on the dyno and like to know what power I can make with this setup... 550hp would be nice, but glad if 530 will be possible... -Stock j-spec engine -Tubonetics cast-manifold -Mines wastgate 35mm -Turbo; Gt4082jb ar96 -Vipec v88 -bosch 044 pump -Sard 650cc droppins -Stock fuellines and pulsation demper still in place -rps clutch -3inch exhaust Would like your opinion about this, I know the best way to get over 550 is bigger cams, but have to get a bigger wallet first Quote Link to comment Share on other sites More sharing options...
Ric Posted September 17, 2010 Share Posted September 17, 2010 3hp Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 -Bkr7e plugs gapped to 0,7mm -Thinking of 1,4bar of boost...(Or does it need to go higher?) Quote Link to comment Share on other sites More sharing options...
jayssupra Posted September 17, 2010 Share Posted September 17, 2010 You will need bigger injector if you want over 550 bhp, 650 are only good for 550, get yourself some 800cc injectors Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 3hp would be nice when the engine is off.. Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 Don't want over 550 for know... 800cc got lost when I oredered these, a friend of mine has got very quick a pair of 650cc for me... So 530 would be possible this way? Quote Link to comment Share on other sites More sharing options...
jayssupra Posted September 17, 2010 Share Posted September 17, 2010 Don't want over 550 for know... 800cc got lost when I oredered these, a friend of mine has got very quick a pair of 650cc for me... So 530 would be possible this way? What ECU you going to run all this with, Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 Vipec v88 Quote Link to comment Share on other sites More sharing options...
jayssupra Posted September 17, 2010 Share Posted September 17, 2010 As long as you don't push the injectors more than 85-90% duty and you have a good mapper , you should get your 530-550bhp Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 650cc's on 85-90% will be +/- 550hp... The stock j-spec cams and the cast-manifold spool up nice!, But will this not be the restriction to get over 500hp?? Quote Link to comment Share on other sites More sharing options...
jayssupra Posted September 17, 2010 Share Posted September 17, 2010 My car has stock cams and stock internals, i also am running 650cc injectors, my T67 turbo at 1.6 bar is running 548 bhp 555 torque you will be fine. Quote Link to comment Share on other sites More sharing options...
EMPEROR Posted September 17, 2010 Share Posted September 17, 2010 If you don't wanna go above 550, why would you put "-Turbo; Gt4082jb ar96"?! I think 35 series would be better... Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 550hp will be ok for the next year, wallet is getting empty Next step will be 800cc's, pulsation-demper away, 264cams.... 1500euro's again And after that I have to win the lottery orso to get more power, but I like to go to the track some-times and for me this will be more then enough then (+/-600hp at the end) @jay; Your car is also jspec? And I looked at your garage, did you do 11,8 1/4mile on street-tyres? Quote Link to comment Share on other sites More sharing options...
johnny g Posted September 17, 2010 Share Posted September 17, 2010 Or even the newish GT37R Quote Link to comment Share on other sites More sharing options...
jayssupra Posted September 17, 2010 Share Posted September 17, 2010 550hp will be ok for the next year, wallet is getting empty Next step will be 800cc's, pulsation-demper away, 264cams.... 1500euro's again And after that I have to win the lottery orso to get more power, but I like to go to the track some-times and for me this will be more then enough then (+/-600hp at the end) @jay; Your car is also jspec? And I looked at your garage, did you do 11,8 1/4mile on street-tyres? 11.8 on MT streets, fastest time on street tyres was 12.1 Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 Hmmm gt37r sounds nice.. Gt4082jb will do the job, but spool up will be quicker with gt37r, and in combination with a cast-manifold it will spool up as a @#$%^^ Quote Link to comment Share on other sites More sharing options...
Rinus Posted September 17, 2010 Author Share Posted September 17, 2010 Ok MT-street is not a full slick is it? Got M&H drag-radial (not a full-slick)with bpu(408HP) 12,49S 1/4 Mile Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.